2013年12月22日星期日

The Precautions for LED tube replace traditional tube


Now basically built-in power led street light fixture , so basically to replace the original fluorescent -based, while the traditional use of fluorescent species is divided into two : inductive fluorescent lamps , electronic fluorescent lamps. The following are brief these two kinds of different ways to replace lamps

 1 , inductive fluorescent lamps : Basically a little basic knowledge electrician who are aware that the traditional fluorescent lamps are available : bracket, ballast , starter, fluorescent tubes, these four components , which need to be replaced with LED lamps only disconnect the starter , you can make up an LED replacement lamp normal use. However, if you want to maximize the power , but also the inside of the bracket and take off the ballast circuit , do so because the ballast would have been without disassembly work , be an unnecessary waste of energy .

 2 , electronic fluorescent lamps : lamps and electronic transformation of relatively trouble some , because the way of working with electronic ballast style is completely different , so in this type of lighting is used it must be on the inside of the electronic ballast bracket is completely shorted to make normal use of led street light fixture .


 LED tube during removal must note the following installation issues :

 1, LED lamps and accessories can not bear too much pressure , attention to keep them safe.
 2 , the installation should be familiar by an electrician certificate or person to install the circuit to avoid electric shock.
 3, LED lamp if deformed or damaged, please contact with the purchase and replacement of manufacturers .
 4 , the LED lamp retrofit total gate need to disconnect power to ensure personal safety.
 5 , set the LED lamp installed indoors , outdoors pay attention to water proof .
 6, LED lamp is not suitable for use in high humidity environments climax , otherwise their life vulnerable.

 LED lighting compared to traditional lighting, are vulnerable. Especially as the internal components such as LED tube lamps relatively fine , at the time of installation is noteworthy , in order to avoid problems .
 

没有评论:

发表评论