The energy crisis, global warming and the ecological environment deteriorating moment to remind people that the Earth has been exhausted, the way to change people's access to energy and improve energy efficiency has become the consensus of the current world.
Due to the structure of the world in the use of electricity, electricity for lighting accounts for about 19% of total electricity consumption; English Brian Edwards in its preparation of the "sustainable architecture" that all the energy consumed in the United Kingdom which, about half of the building, whereas the construction of the artificial lighting energy consumption accounts for 15% to 50% of the total building energy consumption; in our electricity for lighting accounts for about 12% of the country's total electricity consumption, and China's annual lighting electricity growth rate (conservative estimate) is about 5%. From the above data, we can see that, although the level of economic development of countries due to the different, the proportion of electricity for lighting are also different, but led high bay light price energy consumption has become an important part of each country's energy consumption. Thorny problem lighting energy problems will become governments and professionals must face.
Survey shows that in 2007, China's total electricity consumption of about 2.421 trillion degrees, according to Ming electricity consumption accounted for 12% of social computing, in 2007 China's lighting electricity consumption of about 290.5 billion degrees, such as 50% of the lighting device using LED lighting (by the use of energy-saving 50% of the low-end products is calculated), at least annually, saving 72.6 billion kWh, equivalent to build two of the Three Gorges Power Station or 8-9 million kilowatt-supercritical coal-fired generating units, saving power plant construction funds nearly billion annual savings of nearly 12.52 million tons raw coal, coal-fired power generation terms of carbon dioxide emissions per watt 0.638 kg per year and can reduce the 46.32 million tons of carbon dioxide emissions.
Currently, the international development and production of LED mainly in the United States, Europe, Japan and other countries and regions. Australia's decision in 2010 to stop the use of ordinary incandescent, LED lighting is replaced supplies became the first country plans to ban the use of traditional incandescent lamps. However, in the application of domestic LED lighting products, has started relatively difficult. Statistics show that in China, such as energy-saving LED lighting penetration rate is still low, the current annual sales of incandescent still about 2 billion, using a small proportion of urban residents incandescent generally above 50%.
New and efficient light source, in particular the development of a white light source (for general lighting) for a significant reduction in electricity consumption for lighting has a very important role, because it can reduce the growth rate of power consumption, thereby reducing the cost of new power capacity, reduce energy consumption and reduce greenhouse gas emissions into the atmosphere and other contaminants. LED, especially white led street lighting Manufacturer, its theory and reality advantages compared with conventional light sources has, favored by the majority of professionals. It appears for the lighting industry to carve out a new technology, and is designed to provide a more energy-efficient lighting choices.
LED industry is a new energy industry, a green industry, a green one for the credit industry and for our children and grandchildren an industry in the history of mankind lighting a new milestone!
2014年11月30日星期日
Why is LED lighting so popular?
Today's lighting is no longer fits in the past incandescent electric light now like metal halide lamp, energy saving lamps, HID light, LED, etc; different lights will have their comparison between different; it LED lights now see a good development trend, we should understand it with ordinary lighting exactly where the difference? why led street lights price so popular in today's market?
Compare LED lighting and general lighting
The biggest difference with the traditional lighting LED lighting LED lighting that is a completely electronic products, and traditional lighting is only one electrical products. Thus LED lighting can be easily associated with various types of sensors, in order to achieve light control, infrared control and other automatic control. Such as LED lights automatically switch, with a light-sensitive sensor can be simple to achieve; community walkway and garden lighting at night, you can use an infrared sensor to collect information on human activities, automatic opening and closing lighting.
General lighting contains large amounts of mercury vapor, mercury vapor will evaporate if broken into the atmosphere. But basically do not use LED lighting mercury, and LED lighting products do not contain lead, safeguard the environment play a role; traditional lamps will produce a lot of heat, but LED lighting is all the energy is converted to light, not form energy waste. And the file, it will not produce clothing fade phenomenon; LED lighting does not produce noise, on the application of sophisticated electronic equipment place for a good choice. Suitable for libraries, offices and the like places; traditional fluorescent lamp using AC, so will have 100-120 times strobe. LED lighting is to directly convert AC to DC, no flicker, maintain eye; led street lighting Manufacturer does not produce ultraviolet light, and thus will not like the traditional lighting, as there are a lot of mosquito coil next to the light source. Interior will become increasingly clean and tidy.
Compare LED lighting and general lighting
The biggest difference with the traditional lighting LED lighting LED lighting that is a completely electronic products, and traditional lighting is only one electrical products. Thus LED lighting can be easily associated with various types of sensors, in order to achieve light control, infrared control and other automatic control. Such as LED lights automatically switch, with a light-sensitive sensor can be simple to achieve; community walkway and garden lighting at night, you can use an infrared sensor to collect information on human activities, automatic opening and closing lighting.
General lighting contains large amounts of mercury vapor, mercury vapor will evaporate if broken into the atmosphere. But basically do not use LED lighting mercury, and LED lighting products do not contain lead, safeguard the environment play a role; traditional lamps will produce a lot of heat, but LED lighting is all the energy is converted to light, not form energy waste. And the file, it will not produce clothing fade phenomenon; LED lighting does not produce noise, on the application of sophisticated electronic equipment place for a good choice. Suitable for libraries, offices and the like places; traditional fluorescent lamp using AC, so will have 100-120 times strobe. LED lighting is to directly convert AC to DC, no flicker, maintain eye; led street lighting Manufacturer does not produce ultraviolet light, and thus will not like the traditional lighting, as there are a lot of mosquito coil next to the light source. Interior will become increasingly clean and tidy.
The Myth of LED energy-saving lamps
LED lighting is one of the world's focus has been to promote the project and, therefore, has been gradually accepted by consumers, it is worth noting that the average consumer for this new led street lighting Manufacturer source there are some errors in the understanding of:
A misunderstanding, a few W's LED bulb can replace incandescent few W's.
Because usually they talk wattage incandescent lumens without speaking, over time they affect consumer buying habits of the lamp. LED technology with incandescent lamps, the LED light effect is still evolving, so are not representative of its wattage lumens. Some manufacturers are given on the packaging is similar to "40W incandescent replacement product," the label to help consumers buy.
Jane's words, and that they can not be represented by W LED bulb flux.
Myth, LED greater the power, brightness, brighter.
LED's generally believed that the greater the power, the greater is its lumen flux, representing the brightness will be more bright, in fact, this is a wrong perception, different power led street light wholesale lumen output (lm), the higher, the more saving, like on: 7W and 8W LED bulbs compared if higher lumen output 7W 8W, then, 7W light actually more energy efficient than 8W in.
A misunderstanding, a few W's LED bulb can replace incandescent few W's.
Because usually they talk wattage incandescent lumens without speaking, over time they affect consumer buying habits of the lamp. LED technology with incandescent lamps, the LED light effect is still evolving, so are not representative of its wattage lumens. Some manufacturers are given on the packaging is similar to "40W incandescent replacement product," the label to help consumers buy.
Jane's words, and that they can not be represented by W LED bulb flux.
Myth, LED greater the power, brightness, brighter.
LED's generally believed that the greater the power, the greater is its lumen flux, representing the brightness will be more bright, in fact, this is a wrong perception, different power led street light wholesale lumen output (lm), the higher, the more saving, like on: 7W and 8W LED bulbs compared if higher lumen output 7W 8W, then, 7W light actually more energy efficient than 8W in.
The issues of LED Although environmental can not be ignored recycling
Country promoting the "green light" project, the old energy-saving lamps million financial subsidies to promote China's first batch of entering the market focused on retirement, and the future of the annual consumption of the more than 1 billion. Because of old CFLs contain mercury, lead and toxic and harmful elements, by experts as second only to the second largest waste batteries garbage "mercury pollution," In contrast, our energy-saving lamp recycling system is very "naive" such as improper disposal, the risk of contamination can not be ignored.
On the one hand, with the rapid development of the economy, in recent years, China's electronic waste generation rate is very alarming. According to the 2010 led high bay lighting fixture wholesale released a report, China has become the world's second largest producer of e-waste, producing over 2.3 million tons of e-waste per year, second only to the United States, 3 million tons; to 2020, China's scrap computer than double to triple in 2007, discarded mobile phones will grow seven times. E-waste recycling and utilization in the process, there are varying degrees of damage to the environment and human health phenomenon pollution, urgent attention.
On the other hand, LED more extensive use of fields, including: television screens, laboratory equipment, mobile phones, watches, computers, home lighting, retail electric lighting, traffic signs and car brake lights. These are partial use of LED's, LED continues to replace incandescent light, there will be more use of LED lights in normal livelihoods. LED bulbs consume less power, and strong illumination. In addition, LED bulbs like CFL bulbs contain mercury (Hg harmful to the environment). LED lights also can receive more wear and tear than conventional bulbs. Meanwhile lighting, will not be affected by moisture or cold weather will not affect the operation of all LED lighting. LED bulb carbon dioxide emissions only 10% of the traditional light bulb emissions. Austrian its Andean Technology Co., Ltd. Guangdong official said, although the LED itself on environmental protection, but if the right to recover, the impact on the environment will be smaller.
Study at the University of California, pointed out that most of the LED lamps contain nickel high share of colorful LED lights will contain a lot of lead. In addition, the arsenic content is also overspent. These substances not only harmful to the environment, will also affect human well-being. Of course, than the traditional LED lights green, but did not like running out of incandescent bulbs that lost influence LED formed is long. Given the recent significant increase in demand for LED lights, use LED to come back even more important than the number of extended life of the LED.
And even more attention in the community caused by contaminated scrap energy-saving lamps on the occasion, the LED industry as a rookie, Austrian its Andean Technology Co., Ltd. of Guangdong, China announced that its micro-brand LED lights in the sun to become an affordable brand at the same time, this has been achieved industrial design modular, plug-in components without welding, future product runs can be recovered later by component, resource can regenerate and become a truly environmentally friendly, renewable products. Austrian its led high bay light for sale Guangdong official said that the current LED lighting has been used in a variety of lighting throughout, and gradually replace the traditional incandescent bulbs. "In the product life cycle, LED has always been very environmentally friendly, but if you can recover the re-use, it will be more protection of the environment."
On the one hand, with the rapid development of the economy, in recent years, China's electronic waste generation rate is very alarming. According to the 2010 led high bay lighting fixture wholesale released a report, China has become the world's second largest producer of e-waste, producing over 2.3 million tons of e-waste per year, second only to the United States, 3 million tons; to 2020, China's scrap computer than double to triple in 2007, discarded mobile phones will grow seven times. E-waste recycling and utilization in the process, there are varying degrees of damage to the environment and human health phenomenon pollution, urgent attention.
On the other hand, LED more extensive use of fields, including: television screens, laboratory equipment, mobile phones, watches, computers, home lighting, retail electric lighting, traffic signs and car brake lights. These are partial use of LED's, LED continues to replace incandescent light, there will be more use of LED lights in normal livelihoods. LED bulbs consume less power, and strong illumination. In addition, LED bulbs like CFL bulbs contain mercury (Hg harmful to the environment). LED lights also can receive more wear and tear than conventional bulbs. Meanwhile lighting, will not be affected by moisture or cold weather will not affect the operation of all LED lighting. LED bulb carbon dioxide emissions only 10% of the traditional light bulb emissions. Austrian its Andean Technology Co., Ltd. Guangdong official said, although the LED itself on environmental protection, but if the right to recover, the impact on the environment will be smaller.
Study at the University of California, pointed out that most of the LED lamps contain nickel high share of colorful LED lights will contain a lot of lead. In addition, the arsenic content is also overspent. These substances not only harmful to the environment, will also affect human well-being. Of course, than the traditional LED lights green, but did not like running out of incandescent bulbs that lost influence LED formed is long. Given the recent significant increase in demand for LED lights, use LED to come back even more important than the number of extended life of the LED.
And even more attention in the community caused by contaminated scrap energy-saving lamps on the occasion, the LED industry as a rookie, Austrian its Andean Technology Co., Ltd. of Guangdong, China announced that its micro-brand LED lights in the sun to become an affordable brand at the same time, this has been achieved industrial design modular, plug-in components without welding, future product runs can be recovered later by component, resource can regenerate and become a truly environmentally friendly, renewable products. Austrian its led high bay light for sale Guangdong official said that the current LED lighting has been used in a variety of lighting throughout, and gradually replace the traditional incandescent bulbs. "In the product life cycle, LED has always been very environmentally friendly, but if you can recover the re-use, it will be more protection of the environment."
how to identify the pros and cons of LED lamps
LED lamps because of its energy-saving effect is obvious, long life, no stroboscopic effect, no noise, light and soft features wide operating voltage range and increasingly welcomed by consumers. But now LED lamps on the market a lot of mixed quality. How to choose their own satisfaction with the product in the lighting store an array of energy-saving lamps? By "five watch" the merits of energy-saving lamps can be identified, described below.
A look at packaging and labels
National mandatory buy led high bay lamps products manufacturer in the packaging marked the following: Rated voltage, voltage range, rated power, rated frequency. In general, good quality products, label printing quality, legible, easy to fall off, wipe with a soft damp cloth, signs legible, indelible, there are manufacturers of trademarks and related certification mark. Poor print quality and shoddy products, fonts, fuzzy, easy to erase, no manufacturer's trademarks and related certification mark.
Second, look at the appearance of LED lamps
True LED lamps, with tricolor pipes, white, hands over look whiter. Also, speaking from the lamp, the lamp can put more than just put them together, tube shapes and sizes, mostly good consistency bending molding machines, mostly mass-produced products. Good product consistency, quality assurance easier interchangeability of better maintenance. Of course, it can not have cracks between loose and interfaces are prized appearance. During the installation, demolition process, there should be no cap loose, head tilt phenomenon.
Lights must choose the kind of engineering plastics flame retardant plastic case type. Ordinary plastic deformation and easily flammable, is prohibited for the production of energy-saving lamps. On the surface can be easily distinguish between the two, the latter surface is smooth, shiny, former surface texture similar to frosted glass.
Third, look at the temperature at work
LED energy saving lamp under normal operating condition, the temperature should be low. Otherwise, LED energy saving lamp life is very short. Meanwhile, energy saving lights, there are flashing quickly, or very harsh fluctuations, shows the existence of quality problems that energy-saving lamps.
Four to see start-up performance
LED lamps start with two characteristics: First, the higher the temperature, the easier start; two, turn off lights, not flash. Also worth mentioning is that many LED lamps opened very dark, which is detrimental to the life of the bulb, LED energy saving lamp shall be provided with power supply circuit and PCB board in its interior.
Five look interference
In China, the electromagnetic compatibility is electrical project must, however, led high bay light for sale is very complex to detect when the user purchases a lamp to see if there is electromagnetic compatibility testing by the national flag, the second is with a shortwave radio on the packaging, when when the lights work, placed near the radio, shortwave radio should not lower the noise emitted by radio at EMC test lamp better.
A look at packaging and labels
National mandatory buy led high bay lamps products manufacturer in the packaging marked the following: Rated voltage, voltage range, rated power, rated frequency. In general, good quality products, label printing quality, legible, easy to fall off, wipe with a soft damp cloth, signs legible, indelible, there are manufacturers of trademarks and related certification mark. Poor print quality and shoddy products, fonts, fuzzy, easy to erase, no manufacturer's trademarks and related certification mark.
Second, look at the appearance of LED lamps
True LED lamps, with tricolor pipes, white, hands over look whiter. Also, speaking from the lamp, the lamp can put more than just put them together, tube shapes and sizes, mostly good consistency bending molding machines, mostly mass-produced products. Good product consistency, quality assurance easier interchangeability of better maintenance. Of course, it can not have cracks between loose and interfaces are prized appearance. During the installation, demolition process, there should be no cap loose, head tilt phenomenon.
Lights must choose the kind of engineering plastics flame retardant plastic case type. Ordinary plastic deformation and easily flammable, is prohibited for the production of energy-saving lamps. On the surface can be easily distinguish between the two, the latter surface is smooth, shiny, former surface texture similar to frosted glass.
Third, look at the temperature at work
LED energy saving lamp under normal operating condition, the temperature should be low. Otherwise, LED energy saving lamp life is very short. Meanwhile, energy saving lights, there are flashing quickly, or very harsh fluctuations, shows the existence of quality problems that energy-saving lamps.
Four to see start-up performance
LED lamps start with two characteristics: First, the higher the temperature, the easier start; two, turn off lights, not flash. Also worth mentioning is that many LED lamps opened very dark, which is detrimental to the life of the bulb, LED energy saving lamp shall be provided with power supply circuit and PCB board in its interior.
Five look interference
In China, the electromagnetic compatibility is electrical project must, however, led high bay light for sale is very complex to detect when the user purchases a lamp to see if there is electromagnetic compatibility testing by the national flag, the second is with a shortwave radio on the packaging, when when the lights work, placed near the radio, shortwave radio should not lower the noise emitted by radio at EMC test lamp better.
Advantages and disadvantages of high power LED lighting lamp
High-power LED is one of the most important means to achieve high flux. High power LED lighting has many advantages, there are also disadvantages. How to make good use of high-power LED is the key, while for high-power LED lighting products and traditional lighting products were compared, but also high lumen LED lighting in the area of the discussion.
First, the history of the development and application of LED LED has the potential to increase the brightness of every 10 years, from birth to 30 times, 10 times the price drop "Haitz" law of rapid development. Ordinary high-brightness white led laboratory currently has reached the level of 100lm / W's, 50lm / W high-power led high bay light price has entered the commercial. In terms of monochromatic light, red, yellow, blue, green light effect is being constantly refresh the record, LED light source as a new range of applications more widely, has gradually attracted more attention and expectations.
Currently LED applications with diversified distribution in various industries, including directions, display, backlight, lighting and so on. LED lighting is the most potential for many applications in the industry, with the lower LED light continuous improvement and cost efficiency, which is in the possession of the entire lighting market will be growing. Following the United States, "the next generation of lighting plan," Japan's "21st Century Lighting Plan", the EU's "Rainbow Project" and South Korea's "solid-state lighting plan" was established in 2003, China National Semiconductor Lighting Project Team, aims to integrate resources, fast forward to enter the LED lighting market. According to the Chinese Academy of Engineering academician Liang-Hui Chen predicted that China between 2005 and 2015, the semiconductor lighting cumulative saving 400 billion kWh of electricity, saving electricity costs for users of 260 billion yuan, 150 billion yuan output value creation, to solve the employment one million population.
By then, the semiconductor lighting energy savings will exceed the annual "Big Mac" - the annual generating capacity of the Three Gorges power station! In the context of the growing shortage of energy, the use of LED energy-saving features, the development of LED lighting is the positive response to the construction of a conservation-oriented society of the Government.
Second, the high-power LED characteristics and compare with other LED light source is known as the "green light" deserved. In the lighting industry, the comparative analysis with traditional light sources exhibit some aspects irreplaceable advantages: LED as a light source for illumination has the following advantages:
1. Low power consumption: luminous efficiency of 75lm / W of LED power consumption than equivalent incandescent brightness reduced by about 80%;
2, long life: the product life of up to 50,000 hours, 24 hours of continuous light can be used for seven years;
3, the dynamic control of brightness and color easy: You can achieve continuously adjustable brightness, high color purity, enables dynamic color conversion and digital control;
4, flexible dimensions: organic can be achieved with the construction of integration, to only light but not light;
5, environmental protection: no toxic metals mercury, no infrared and ultraviolet radiation;
6, color: bright saturated, pure, without filters, red, green and blue elements available to tune into a variety of colors, can be varied to achieve, by changing, mixing light effects, color with excellent results. Set so many advantages in one, made us feel strongly promote the use of LED is a valuable work.
However, comparison of led high bay light for sale and other light sources are also inadequate aspects, such as the color of the white light illumination is low. Currently yellow and blue phosphors to produce white LED, its color index of about 80. As a general lighting can be, but for some color spaces that require high resolution becomes insufficient. Although the red phosphor by adding the appropriate methods, you can make up to 90 CRI or higher, but compared with incandescent 99 still has some gaps, and its efficiency is affected. By RGB color mixing treatment can also improve color rendering, but the technology needs to do more work on the universal application, so in terms of color, LED still needs to be improved. As for the price is too high, one-time investment is large, in fact, from a comprehensive cost considerations, many occasions to use LED or significant cost savings.
First, the history of the development and application of LED LED has the potential to increase the brightness of every 10 years, from birth to 30 times, 10 times the price drop "Haitz" law of rapid development. Ordinary high-brightness white led laboratory currently has reached the level of 100lm / W's, 50lm / W high-power led high bay light price has entered the commercial. In terms of monochromatic light, red, yellow, blue, green light effect is being constantly refresh the record, LED light source as a new range of applications more widely, has gradually attracted more attention and expectations.
Currently LED applications with diversified distribution in various industries, including directions, display, backlight, lighting and so on. LED lighting is the most potential for many applications in the industry, with the lower LED light continuous improvement and cost efficiency, which is in the possession of the entire lighting market will be growing. Following the United States, "the next generation of lighting plan," Japan's "21st Century Lighting Plan", the EU's "Rainbow Project" and South Korea's "solid-state lighting plan" was established in 2003, China National Semiconductor Lighting Project Team, aims to integrate resources, fast forward to enter the LED lighting market. According to the Chinese Academy of Engineering academician Liang-Hui Chen predicted that China between 2005 and 2015, the semiconductor lighting cumulative saving 400 billion kWh of electricity, saving electricity costs for users of 260 billion yuan, 150 billion yuan output value creation, to solve the employment one million population.
By then, the semiconductor lighting energy savings will exceed the annual "Big Mac" - the annual generating capacity of the Three Gorges power station! In the context of the growing shortage of energy, the use of LED energy-saving features, the development of LED lighting is the positive response to the construction of a conservation-oriented society of the Government.
Second, the high-power LED characteristics and compare with other LED light source is known as the "green light" deserved. In the lighting industry, the comparative analysis with traditional light sources exhibit some aspects irreplaceable advantages: LED as a light source for illumination has the following advantages:
1. Low power consumption: luminous efficiency of 75lm / W of LED power consumption than equivalent incandescent brightness reduced by about 80%;
2, long life: the product life of up to 50,000 hours, 24 hours of continuous light can be used for seven years;
3, the dynamic control of brightness and color easy: You can achieve continuously adjustable brightness, high color purity, enables dynamic color conversion and digital control;
4, flexible dimensions: organic can be achieved with the construction of integration, to only light but not light;
5, environmental protection: no toxic metals mercury, no infrared and ultraviolet radiation;
6, color: bright saturated, pure, without filters, red, green and blue elements available to tune into a variety of colors, can be varied to achieve, by changing, mixing light effects, color with excellent results. Set so many advantages in one, made us feel strongly promote the use of LED is a valuable work.
However, comparison of led high bay light for sale and other light sources are also inadequate aspects, such as the color of the white light illumination is low. Currently yellow and blue phosphors to produce white LED, its color index of about 80. As a general lighting can be, but for some color spaces that require high resolution becomes insufficient. Although the red phosphor by adding the appropriate methods, you can make up to 90 CRI or higher, but compared with incandescent 99 still has some gaps, and its efficiency is affected. By RGB color mixing treatment can also improve color rendering, but the technology needs to do more work on the universal application, so in terms of color, LED still needs to be improved. As for the price is too high, one-time investment is large, in fact, from a comprehensive cost considerations, many occasions to use LED or significant cost savings.
How to choose the home interior LED lighting?
LED lighting has gradually become a family to buy the lamp of choice, but there are too many fish in the market of inferior led street lighting fixture, however hard, for how to buy the perfect LED lighting, has become a problem of many consumers. Here just like to tell you about how to buy the perfect LED lamps.
First, consider the "simple" products for the principle. Lighting in the room should play a finishing touch. Overly complex shape, too complicated colors are not suitable for simple design room.
Second, to facilitate the purchase of pre-installed LED lamps, most people have experienced the embarrassment of replacement bulbs Ceiling: stepping on the table, marching chair, head 90 degrees, lift the arms too far to 2.5 meters or even higher ceiling. Be sure to consider when choosing fixtures easy lamp replacement. No room should choose a chandelier, chandelier lamp mouth to the ground because the distance is small.
Of course, energy efficiency is also very important, LED lamps have basically the concept of energy saving, energy-saving light bulbs only, sound and lighting, nor distribute the heat for long lamps. Energy saving light bulbs are mostly standard screw, but there are two caliber chandelier, one is the standard, you can use the energy-saving light bulbs; one is non-standard, you can not use energy-saving light bulbs.
Further more a matter of principle to consider the safety of the product, be sure to choose the regular manufacturers of led street light wholesale. Regular products are marked with the total load, according to the total load, can determine how much wattage of the lamp, especially the most critical for long chandelier, i.e., the first number of each lamp wattage × = total load. Another big tidal should use waterproof lamps.
Finally, the issue of coordination, the overall style of the room should be coordinated with the lighting, and more light fixtures in the same room, it should keep the color coordination or style coordination. Such as wooden walls, wooden cabinet, wooden rectangular top balcony, suitable for loading a rectangular wooden lamp. With wrought iron tables, glass dining tables and chairs metal pipe rectangular hall suitable for loading a rectangular metal tube material chandeliers. Ann golden cabinet door handles, gold spotlights bedroom, with a suitable light golden. Learn to skillfully coordinated with lamps, so that every family is even more welcoming.
First, consider the "simple" products for the principle. Lighting in the room should play a finishing touch. Overly complex shape, too complicated colors are not suitable for simple design room.
Second, to facilitate the purchase of pre-installed LED lamps, most people have experienced the embarrassment of replacement bulbs Ceiling: stepping on the table, marching chair, head 90 degrees, lift the arms too far to 2.5 meters or even higher ceiling. Be sure to consider when choosing fixtures easy lamp replacement. No room should choose a chandelier, chandelier lamp mouth to the ground because the distance is small.
Of course, energy efficiency is also very important, LED lamps have basically the concept of energy saving, energy-saving light bulbs only, sound and lighting, nor distribute the heat for long lamps. Energy saving light bulbs are mostly standard screw, but there are two caliber chandelier, one is the standard, you can use the energy-saving light bulbs; one is non-standard, you can not use energy-saving light bulbs.
Further more a matter of principle to consider the safety of the product, be sure to choose the regular manufacturers of led street light wholesale. Regular products are marked with the total load, according to the total load, can determine how much wattage of the lamp, especially the most critical for long chandelier, i.e., the first number of each lamp wattage × = total load. Another big tidal should use waterproof lamps.
Finally, the issue of coordination, the overall style of the room should be coordinated with the lighting, and more light fixtures in the same room, it should keep the color coordination or style coordination. Such as wooden walls, wooden cabinet, wooden rectangular top balcony, suitable for loading a rectangular wooden lamp. With wrought iron tables, glass dining tables and chairs metal pipe rectangular hall suitable for loading a rectangular metal tube material chandeliers. Ann golden cabinet door handles, gold spotlights bedroom, with a suitable light golden. Learn to skillfully coordinated with lamps, so that every family is even more welcoming.
The differences of LED display in raw materials
General LED display, LED electronic display, according to the brand and that use of raw materials, generally there will be price difference between LED display full color LED display, led high bay light for sale board. But in the end, LED display screen price difference of the main reasons, had to buy raw materials from different analyzes curtain LED display. General LED display screen material up from the categories can be divided into the entrance materials and domestic materials.
In terms of the light-emitting chip entrance fountain: the United States, Japan, Taiwan, and now there are department-made chips. Each light-emitting chip has its own advantages and disadvantages. US and Japanese chip, because without a break since grasp the core technology in similar gripped with King, the US, Japan and the high cost of the chip.
Taiwan and the local chip cost relative strength compared to self-control, but its performance is compared to the US, Japan chip, there are certainly gaps.
If the LED screen is reflected in the case of an emergency than the force, or recommend the use of the material is better than force entrance; in addition to the big screen LED chips, led street lighting Manufacturer the impact of other emergency screen cost factor LED driver IC, no more than if I am a customer then I willingly choose rather than the power of a good driver IC, because it is of course a bit costly, but the driver IC is very urgent factors affecting LES reflect the quality and longevity of the screen, do full-color LED screen time is certainly reflected in the constant pressure of constant use driver IC flow; in other areas, such as material supply, cabinet, and the production of all kinds of accessories reflect the screen.
In terms of the light-emitting chip entrance fountain: the United States, Japan, Taiwan, and now there are department-made chips. Each light-emitting chip has its own advantages and disadvantages. US and Japanese chip, because without a break since grasp the core technology in similar gripped with King, the US, Japan and the high cost of the chip.
Taiwan and the local chip cost relative strength compared to self-control, but its performance is compared to the US, Japan chip, there are certainly gaps.
If the LED screen is reflected in the case of an emergency than the force, or recommend the use of the material is better than force entrance; in addition to the big screen LED chips, led street lighting Manufacturer the impact of other emergency screen cost factor LED driver IC, no more than if I am a customer then I willingly choose rather than the power of a good driver IC, because it is of course a bit costly, but the driver IC is very urgent factors affecting LES reflect the quality and longevity of the screen, do full-color LED screen time is certainly reflected in the constant pressure of constant use driver IC flow; in other areas, such as material supply, cabinet, and the production of all kinds of accessories reflect the screen.
2014年11月28日星期五
UK County Concerned about LED Streetlight Upgrades
Residents in Dorset County, UK complained new buy led high bay lamps being installed in certain areas in the county have been too bright, while others were concerned with the lack of overnight lighting, according to a BBC report.
To reduce lighting energy consumption, the county switched off streetlights between midnight and 5:30 Am. Council members say the lights are only being switched off in areas where there are no significant road safety and crime.
In areas of Bournemouth and Poole are installing new low-energy LED lights to replace sodium bulbs. A GBP 7 million (US $11 million) project is being rolled out in Bournemouth to retrofit 16,500 streetlights with LEDs, which is expected to save the borough more than GBP 30 million in 30 years.
The borough council also approved a GBP 10 million plan to replace 17,500 streetlights in Poole in the next six years with led high bay light price, which is hoped to save about GBP 20 million in the next 30 years.
Despite the county efforts, Alison Lynch, a personal trainer in Bournemouth, noted the new LED streetlights left dark patches in between, making night runs fairly difficult around Christchurch.
Another resident Michael Witherden complained the new LED lights were too bright and affecting his sleeping patterns.
To reduce lighting energy consumption, the county switched off streetlights between midnight and 5:30 Am. Council members say the lights are only being switched off in areas where there are no significant road safety and crime.
In areas of Bournemouth and Poole are installing new low-energy LED lights to replace sodium bulbs. A GBP 7 million (US $11 million) project is being rolled out in Bournemouth to retrofit 16,500 streetlights with LEDs, which is expected to save the borough more than GBP 30 million in 30 years.
The borough council also approved a GBP 10 million plan to replace 17,500 streetlights in Poole in the next six years with led high bay light price, which is hoped to save about GBP 20 million in the next 30 years.
Despite the county efforts, Alison Lynch, a personal trainer in Bournemouth, noted the new LED streetlights left dark patches in between, making night runs fairly difficult around Christchurch.
Another resident Michael Witherden complained the new LED lights were too bright and affecting his sleeping patterns.
2014年11月27日星期四
what is three major trends in the end of autumn and winter lighting
Autumn and winter is approaching, led high bay light price is popular clothing? What colors are popular? What food is popular? What popular sport? Or you can say two. But the question is, autumn and winter 2014 fashion trends Lighting Smarter? Is not instantaneous brain blank. Fortunately, we have professional people to tell.
Recently, the capital of professional lighting stores - Times Square Lighting Bandung foreign exchange released several new lamps, lighting reflects the 2014 autumn and winter fashion trends of the three - closer to the era of style, color chase fashion, to overturn the traditional material.
Lighting in the design cleverly integrated into the era of elements, so that the lighting in the home when accompanied with the owner is no longer a simple lighting tools or decorations, but exudes contemporary inspirational works.
Lido hall lamp, the "Year of the Horse" as a design source, Xu Beihong "Eight Horses" as a model horse skillfully engraved on lamp posts, there is full steam ahead, dash forceful trend; EXDIBE Hall fan light, not only by the high-tech wind blowing up, so naturally cool the entire room, and designed to be a small bee shape, with green, a variety of colors of red, blue, tailored to the children, in line with people's pursuit of individuality Knox hall of a chandelier, the whole shape like a bunch of fireworks bloom; of the times.
Lighting in the design cleverly integrated into the fashion element, with the luminous color of the gradient, enabling the lights transform a variety of colors, make the room as exposure to T Taiwan fashion show in general, is full of fashion.
Hao Qi hall chandelier lighting, the use of non-polar dimming technology, the remote control in the hands of the manipulation, light and dark in the conversion process can be presented in yellow, white and other colors in warm tones, creating a US round of the US huan beautiful scene, quite stylish fashion features.
Lighting in the design of the current world's most advanced material, greatly improve lighting environmental protection, durability and other properties also increase the aesthetics of lighting to make room style more natural and comfortable.
Hao Qi, a chandelier led high bay light for sale showrooms, using the world's most popular translucent acrylic material, compared to the fragile glass, used for a long deformation discoloration PVP material, acrylic translucent material with good transparency chemical stability and weather resistance, coupled with beautiful appearance, Titaiqingying widely favored by consumers.
An acre of land a Chinese pavilion hall chandelier, abandoned rosewood, cherry and other traditional materials, use copper, one to be moisture, corrosion, eliminate safety hazards; secondly modeling Variety, greatly enriched the consumer choice.
Recently, the capital of professional lighting stores - Times Square Lighting Bandung foreign exchange released several new lamps, lighting reflects the 2014 autumn and winter fashion trends of the three - closer to the era of style, color chase fashion, to overturn the traditional material.
Lighting in the design cleverly integrated into the era of elements, so that the lighting in the home when accompanied with the owner is no longer a simple lighting tools or decorations, but exudes contemporary inspirational works.
Lido hall lamp, the "Year of the Horse" as a design source, Xu Beihong "Eight Horses" as a model horse skillfully engraved on lamp posts, there is full steam ahead, dash forceful trend; EXDIBE Hall fan light, not only by the high-tech wind blowing up, so naturally cool the entire room, and designed to be a small bee shape, with green, a variety of colors of red, blue, tailored to the children, in line with people's pursuit of individuality Knox hall of a chandelier, the whole shape like a bunch of fireworks bloom; of the times.
Lighting in the design cleverly integrated into the fashion element, with the luminous color of the gradient, enabling the lights transform a variety of colors, make the room as exposure to T Taiwan fashion show in general, is full of fashion.
Hao Qi hall chandelier lighting, the use of non-polar dimming technology, the remote control in the hands of the manipulation, light and dark in the conversion process can be presented in yellow, white and other colors in warm tones, creating a US round of the US huan beautiful scene, quite stylish fashion features.
Lighting in the design of the current world's most advanced material, greatly improve lighting environmental protection, durability and other properties also increase the aesthetics of lighting to make room style more natural and comfortable.
Hao Qi, a chandelier led high bay light for sale showrooms, using the world's most popular translucent acrylic material, compared to the fragile glass, used for a long deformation discoloration PVP material, acrylic translucent material with good transparency chemical stability and weather resistance, coupled with beautiful appearance, Titaiqingying widely favored by consumers.
An acre of land a Chinese pavilion hall chandelier, abandoned rosewood, cherry and other traditional materials, use copper, one to be moisture, corrosion, eliminate safety hazards; secondly modeling Variety, greatly enriched the consumer choice.
The led lighting industry development trend
In the lighting industry, the rapid development of today, the rapid development of technology, a variety of new product after another. As has been widely used in various fields led street lighting Manufacturer, medical, biological, and other people's lives are becoming more intelligent, convenient and comfortable. So, what will be the future trend of lighting it?
Lighting industry develop in the direction toward customization
In the "customer is God," the consumer era, personalized consumer more vulnerable consumers. Only customer-centric, to meet the individual needs of different consumers, lighting companies can only stand out from the lighting industry, "Red Sea" in.
Bound to the future of lighting LED, OLED and other new light source for illuminating the subject, as the protagonist intelligent interconnect lighting, intelligent lighting systems interconnected sound, light, electricity will be the city's streets, residential, building, structures and other indoor and outdoor lighting environment and lighting carrier gives comfortable light and color. Bold innovation through lighting design allows the building's past, present and future of integration, resulting in a lively and diverse links, and the formation of the city's unique personal style urban region.
At the same time that demand led street lighting fixture control will be achieved, people-oriented, comfortable, safe, energy-saving, energy-saving. Body sensors, remote control, will open and close the lamp in accordance with people's needs. "Meanwhile, what the Secretary-General outlined a" future of lighting "beautiful blueprint: a kind of" light painting "art and artists will be born who will light the outdoor space into a strange fantasy world, people with a variety of light. the carrier dialogue, interaction, is to do a pleasant evening stroll in the shadow of comfortable travel space. Imagine the future of lighting piece blueprint should satisfy most people's minds, "the future of lighting."
Lighting industry develop in the direction toward customization
In the "customer is God," the consumer era, personalized consumer more vulnerable consumers. Only customer-centric, to meet the individual needs of different consumers, lighting companies can only stand out from the lighting industry, "Red Sea" in.
Bound to the future of lighting LED, OLED and other new light source for illuminating the subject, as the protagonist intelligent interconnect lighting, intelligent lighting systems interconnected sound, light, electricity will be the city's streets, residential, building, structures and other indoor and outdoor lighting environment and lighting carrier gives comfortable light and color. Bold innovation through lighting design allows the building's past, present and future of integration, resulting in a lively and diverse links, and the formation of the city's unique personal style urban region.
At the same time that demand led street lighting fixture control will be achieved, people-oriented, comfortable, safe, energy-saving, energy-saving. Body sensors, remote control, will open and close the lamp in accordance with people's needs. "Meanwhile, what the Secretary-General outlined a" future of lighting "beautiful blueprint: a kind of" light painting "art and artists will be born who will light the outdoor space into a strange fantasy world, people with a variety of light. the carrier dialogue, interaction, is to do a pleasant evening stroll in the shadow of comfortable travel space. Imagine the future of lighting piece blueprint should satisfy most people's minds, "the future of lighting."
Analysis of China LED package device industry development trend
(A) flip-chip type LED chip package
In addition to the vertical chip type flip-chip is the industry's highly development. led street light Manufacturer three-dimensional chip production much simpler than that, and can avoid the complexity out process, making mass production feasibility dramatically, with the back-end chip technology and through-hole technology is mature finger assisted in the past have grown more stars Golden Globe solid crystal way into a large area of P, N electrodes directly mount bracket, with the eutectic solid crystal way, will greatly simplify the technical threshold type flip-chip package. Furthermore, the package thermal path shorter, horizontal compared to chip has better cooling capacity, the drive voltage can also be reduced in the future carbon reduction drive, the flip-chip package type would be a good solution.
Based on the above packaging considerations, the main techniques currently used for encapsulating the phosphor coating and turn injection process. Fluorescence is a billion light coating technology development, mainly covering a thin layer of phosphor layer on the chip, so can significantly enhance the luminous efficiency of components, this product is currently billion light has been used in the high-power components.
Technology transfer note is the use of the original in a small surface-mount type products above was a great success, and further use of this technology in the high-power models, to overcome the technical problems with sticky silicone molding die, at present, due to the TV and other backlight assembly of power lifting and reliability requirements, the traditional reflection PPA cover substrate is an organic material, such as silicon or resin can not provide a better ability to heat and light, in order to effectively improve the reliability, plans to use this technology transfer note in backlighting assembly.
On package size, the current can reach the minimum high power package dimensions 3.0 × 3.0mm, or even sample preparation 2.0 × 2.0mm or less, but the current specification is still the most common commercially available 3.5 × 3.5mm product, this extremely broad application of surface products, so as to open Everlight pioneer era of molecular solid-state lighting, Everlight will continue on this product will be applied to the small size and high-power technology to low-cost aluminum nitride ceramic substrate with high reflectivity mirrors fabricate products for the packaging of this bracket, the other co-payment will apply solid crystal technology, with metal fast heat from the LED heart-oriented high thermal conductivity of aluminum nitride ceramics, in order to reduce LED component operating temperatures reach high efficiency (150lm / w), high power (3-5W operation), long life (60000hrs), low-power LED product performance.
The chip select and high quality partners around the world working together to improve the quality and reduce the cost of existing chips, as well as the rapid development of a new chip architecture, with a view to the lowest cost mass production of silicone die technology, reduce existing LED chip package cost technology and optical design and rapid response in line to take the light effects of the new chip architecture designed with a view to achieve mass production of lowest cost, most efficient design goals.
(B) 20W LED package above
In terms of LED packaging, COB packaging technology is another major focus, 10W LED NA following COB packaging technology, this area is still using a single powerful package on mainstream; 20W LED above are more suitable for COB packaging technology. Currently, Japan LED bulb market is mainly converted to polycrystalline COB package focuses mainly on high-power chips and modules are used mostly for MR16 LED light source, such as directional.
Currently with more than COB packaging is aluminum plate, copper substrate and ceramic substrates. The thermal conductivity of each material is different, resulting in differences in their thermal properties, such as thermal conductivity of diamond is 1000, followed by silver and copper is about 400, and then aluminum is more than 100, and between the thermal conductivity of the ceramic 8-22. In the insulating material, the thermal conductivity of ceramic is considered good, with cheap, so many package options ceramic substrates.
(C) high-voltage LED package
In addition to high-power LED, the high-voltage LED package is also a major focus. High voltage LED package products across the 1W, 2W and 4W product market, and the advent of high-voltage products, is a whole new way of thinking to solve the solid-state lighting due to the presence of step-down circuit caused by excess energy depletion problem, and thus help end consumer by reducing purchasing costs. Meanwhile, due to the high pressure of the LED chip itself with the sapphire substrate, the lateral light than the average chip for strong, so the whole point of using a phosphor coated evenly in the package should be designed, in full view in order to package the color temperature consistency, and thus enhance the light quality.
High voltage led high bay light for sale packaging technology focuses continuation above advantages, in addition should also provide consumers with more convenience, such that different areas at different voltage operating conditions, can get quick and easy application. For example Everlight 4W product launch, direct access to a series-parallel circuit board design to meet the global 110V and 220V voltage source different needs. And because the voltage across the voltage single component of the package, up to 110V worse 220V, and therefore in the development of high-voltage LED packaging, Everlight stick with insulating ceramic substrate in the form of the package, in order to reduce the small size between positive and negative electrodes of a spark discharge dangerous.
In addition to the vertical chip type flip-chip is the industry's highly development. led street light Manufacturer three-dimensional chip production much simpler than that, and can avoid the complexity out process, making mass production feasibility dramatically, with the back-end chip technology and through-hole technology is mature finger assisted in the past have grown more stars Golden Globe solid crystal way into a large area of P, N electrodes directly mount bracket, with the eutectic solid crystal way, will greatly simplify the technical threshold type flip-chip package. Furthermore, the package thermal path shorter, horizontal compared to chip has better cooling capacity, the drive voltage can also be reduced in the future carbon reduction drive, the flip-chip package type would be a good solution.
Based on the above packaging considerations, the main techniques currently used for encapsulating the phosphor coating and turn injection process. Fluorescence is a billion light coating technology development, mainly covering a thin layer of phosphor layer on the chip, so can significantly enhance the luminous efficiency of components, this product is currently billion light has been used in the high-power components.
Technology transfer note is the use of the original in a small surface-mount type products above was a great success, and further use of this technology in the high-power models, to overcome the technical problems with sticky silicone molding die, at present, due to the TV and other backlight assembly of power lifting and reliability requirements, the traditional reflection PPA cover substrate is an organic material, such as silicon or resin can not provide a better ability to heat and light, in order to effectively improve the reliability, plans to use this technology transfer note in backlighting assembly.
On package size, the current can reach the minimum high power package dimensions 3.0 × 3.0mm, or even sample preparation 2.0 × 2.0mm or less, but the current specification is still the most common commercially available 3.5 × 3.5mm product, this extremely broad application of surface products, so as to open Everlight pioneer era of molecular solid-state lighting, Everlight will continue on this product will be applied to the small size and high-power technology to low-cost aluminum nitride ceramic substrate with high reflectivity mirrors fabricate products for the packaging of this bracket, the other co-payment will apply solid crystal technology, with metal fast heat from the LED heart-oriented high thermal conductivity of aluminum nitride ceramics, in order to reduce LED component operating temperatures reach high efficiency (150lm / w), high power (3-5W operation), long life (60000hrs), low-power LED product performance.
The chip select and high quality partners around the world working together to improve the quality and reduce the cost of existing chips, as well as the rapid development of a new chip architecture, with a view to the lowest cost mass production of silicone die technology, reduce existing LED chip package cost technology and optical design and rapid response in line to take the light effects of the new chip architecture designed with a view to achieve mass production of lowest cost, most efficient design goals.
(B) 20W LED package above
In terms of LED packaging, COB packaging technology is another major focus, 10W LED NA following COB packaging technology, this area is still using a single powerful package on mainstream; 20W LED above are more suitable for COB packaging technology. Currently, Japan LED bulb market is mainly converted to polycrystalline COB package focuses mainly on high-power chips and modules are used mostly for MR16 LED light source, such as directional.
Currently with more than COB packaging is aluminum plate, copper substrate and ceramic substrates. The thermal conductivity of each material is different, resulting in differences in their thermal properties, such as thermal conductivity of diamond is 1000, followed by silver and copper is about 400, and then aluminum is more than 100, and between the thermal conductivity of the ceramic 8-22. In the insulating material, the thermal conductivity of ceramic is considered good, with cheap, so many package options ceramic substrates.
(C) high-voltage LED package
In addition to high-power LED, the high-voltage LED package is also a major focus. High voltage LED package products across the 1W, 2W and 4W product market, and the advent of high-voltage products, is a whole new way of thinking to solve the solid-state lighting due to the presence of step-down circuit caused by excess energy depletion problem, and thus help end consumer by reducing purchasing costs. Meanwhile, due to the high pressure of the LED chip itself with the sapphire substrate, the lateral light than the average chip for strong, so the whole point of using a phosphor coated evenly in the package should be designed, in full view in order to package the color temperature consistency, and thus enhance the light quality.
High voltage led high bay light for sale packaging technology focuses continuation above advantages, in addition should also provide consumers with more convenience, such that different areas at different voltage operating conditions, can get quick and easy application. For example Everlight 4W product launch, direct access to a series-parallel circuit board design to meet the global 110V and 220V voltage source different needs. And because the voltage across the voltage single component of the package, up to 110V worse 220V, and therefore in the development of high-voltage LED packaging, Everlight stick with insulating ceramic substrate in the form of the package, in order to reduce the small size between positive and negative electrodes of a spark discharge dangerous.
We can see through the recent industry developments trend of led lighting industry
LED lighting market in recent days, although not a lot of unexpected events, but in this seemingly smooth surface remains surging undercurrent, a few days ago there was a message on foot led street light wholesale owners constantly broke out, NVC While it is of sliding lighting control, but Wu Changjiang recently no news, there is no guarantee he finally come to a Jedi ...... following events seen through the large LED industry recently occurred by keyword!
Keywords: substantial positive
21, the central bank released the news: Since November 22 cut financial institutions RMB benchmark lending and deposit interest rates, one-year benchmark lending rate down 0.4 percentage points to 5.6%; year benchmark deposit rate by 0.25 percentage point to 2.75 %; 5-year benchmark lending rate above 6.15% (previously 6.55%), other various grades of interest rates adjusted accordingly. According to market analysts, the interest rates for the property market is definitely a big plus.
The central bank cut interest rates, the real estate sector in general rejoiced that prices will likely usher in a rebound. Constitute a substantial positive interest rate cuts in manufacturing, especially for facing the decline in exports and domestic demand slowdown LED industry, this is undoubtedly the market in the future, or the emergence of new industrial development opportunities. In reducing the risk-free rate of return, but also to raise the equity risk premium, enhanced LED listed companies stock market relative attractiveness of other investment products market.
Keywords: head of Summit
December 1, Alibaba will jointly pushing the LED industry, Guangdong Province semiconductor lighting industry Joint Innovation Center (GSC), the highest in Alibaba Riverside Park Operations Command, "Guangming Ding", co-sponsored by industry experts gathered in a "lighting head Summit ", meanwhile, officially declared the electricity supplier to build LED industry ecosystem.
LED is Alibaba's first large-scale investment in an independent manner operational resources, integration of resources for the first time under the wire industry, for the first time have the line marketing activities of the industry. Guangdong Province is the country's first LED industry as a strategic emerging industries, has been a punch in the first line of LED province. Alibaba jointly occupy half of the domestic LED industry in Guangdong, electricity providers to build LED industry ecosystem. Whole chain on the line, selling for one, establish industry influence industrial belt, horizontal integration ...... "Guangdong model" to lead the country, victorious in the inside and outside the industry, thus, when the joint cooperation Alibaba preferred Guangdong reason, it is obvious .
Keywords: ISA Analysis
Recently, the International Lighting Alliance (ISA) issued the "ISA global semiconductor lighting industry and market trend analysis report (2014)." Its unique features include:
1, global. The report includes the development of different regions of the global semiconductor lighting, such as strategic priorities, policies focused, technology or short board, the market space;
2, the original data. A considerable part of the report from the data and information provided directly by ISA members, especially the data emerging countries, is the first systematic elaboration;
3, for the most used areas (such as street) and the emerging field of (off-grid lighting) to be described in a special section. This is why many companies, consulting organizations eager to understand and clarify aspects;
4, is conducive to the reader to judge comparisons.
Edition of the report is the first industry report ISA, ISA will fully listen to members on the basis of feedback to determine the direction and content of the next report.
Keywords: LED full color
Future, LED full color product technology will continue to enhance and expand the market space, and play the advantages of energy saving, to achieve a more beautiful, creative new applications. Trends to be attributed to the following:
1. Large-screen technology.
2. The definition of high density. High-density, high-definition LED display small spacing will be the future trend.
3. energy conservation. Energy conservation is the direction of our country in any one industry worked for.
4. intelligent. LED full color product development to a certain stage.
5. light and thin. Conducive to product installation, maintenance, more secure, increase the aesthetics.
6. normalized by-point correction. Future-by-point correction will become the norm in full color technology.
7. Full Color civilians.
8. indoor outdoor screen technology. Future, outdoor full color paste will gradually replace the in-line products.
9. decoration, landscape and display integration.
10. enterprises run screen illumination. Currently, they sell lighting the number of firms in the display industry is basically in shape.
Keywords: Energy Plan
Recently, the State Council issued the "Energy Development Strategy Action Plan (2014-2020 years)," clearly the optimization of the energy structure, promote energy technology and innovation as a strategic task of China's energy development, noting in particular efforts to optimize the energy structure, the development of clean carbon energy as the main direction of the energy structure adjustment, vigorously develop renewable energy sources.
Plan proposed to strengthen the building energy planning, implementation of building energy efficiency upgrade project, the implementation of 75 percent of the residential building energy efficiency design standards as soon as possible, to promote energy efficient appliances and green lighting, and actively promote the construction of new energy city.
Energy Action Plan, China will implement conservation priority, based on domestic, green carbon, innovation-driven four strategies.
In short, the "plan" is designed to consume less energy to support economic and social development, the domestic supply of energy security as the main channel, the clean low carbon energy as the main direction of the energy structure adjustment, deepen reform of energy.
Keywords: share
LED lighting industry to maintain rapid growth in recent years, the Ministry predicts domestic led street lighting fixture next year will continue to maintain 20% -30% growth, increasing the share mainly in civil and road lighting and other public areas. In addition, the NDRC resource conservation and environmental protection department expects 2015 LED lighting market share of 20% of the target will be achieved ahead of schedule.
China's LED industry output rate of about 30% growth, the main device luminous efficiency is close to the international mainstream level, basically complete industrial chain. But at the same quality and safety performance of lamps is a major problem, if further cooperation with international companies and research institutions to address quality issues in different ways, in the next 3-5 years, LED lighting products in the Chinese market will be reduced to an acceptable range of people.
Keywords: penetration
Expert analysis, in 2015 the global lighting market will reach $ 82.1 billion, of which, driven by emerging markets poised, LED lighting market will reach $ 25.7 billion, the market penetration of 31.
Experts said that in order to observe the 2015 regional global LED lighting market size, market share in Europe size 23, although did not see massive subsidies, but its high price and the light of cultural differences, so that the LED commercial lighting and outdoor architectural lighting to enhance the market demand. The Chinese market segment share 21 market share, because China is a country of manufacture lighting products, coupled with a complete supply chain cost advantages, market competition relative to other markets and more intense, regardless of brand manufacturers, foundries, or emerging lighting manufacturers and packaging manufacturers, in addition to significantly enhance the penetration rate of LED lighting, the development of sales channels is the year's major development projects.
Keywords: yin and yang contract
"As long as the transaction, how do prices are OK," "trading center have friends, RBI can less tax" ...... when to buy a house, many intermediaries will throw the "internal public relations" gimmick to attract buyers.
In fact, tax avoidance "yin and yang contract" does exist, and for the formation of a real estate transaction gray industrial chain.
"Not only fake real estate license, fake contracts, fake divorce certificate can be produced, but also to manipulate the house last trading price, or even less than one year of house transaction made transactions to evade sales tax for five years." Shanghai prosecutors handling the case a said. In fact, throughout the real estate transaction tax evasion is widespread. Individuals illegal "tax" is unfair to most taxpayers objectively.
As the market enters a period of adjustment, the fine is the direction of real estate regulation, the need for a more refined policies. For Real Estate Agents "yin and yang contract" and "trapped" tax penalties should also be strengthened.
Keywords: substantial positive
21, the central bank released the news: Since November 22 cut financial institutions RMB benchmark lending and deposit interest rates, one-year benchmark lending rate down 0.4 percentage points to 5.6%; year benchmark deposit rate by 0.25 percentage point to 2.75 %; 5-year benchmark lending rate above 6.15% (previously 6.55%), other various grades of interest rates adjusted accordingly. According to market analysts, the interest rates for the property market is definitely a big plus.
The central bank cut interest rates, the real estate sector in general rejoiced that prices will likely usher in a rebound. Constitute a substantial positive interest rate cuts in manufacturing, especially for facing the decline in exports and domestic demand slowdown LED industry, this is undoubtedly the market in the future, or the emergence of new industrial development opportunities. In reducing the risk-free rate of return, but also to raise the equity risk premium, enhanced LED listed companies stock market relative attractiveness of other investment products market.
Keywords: head of Summit
December 1, Alibaba will jointly pushing the LED industry, Guangdong Province semiconductor lighting industry Joint Innovation Center (GSC), the highest in Alibaba Riverside Park Operations Command, "Guangming Ding", co-sponsored by industry experts gathered in a "lighting head Summit ", meanwhile, officially declared the electricity supplier to build LED industry ecosystem.
LED is Alibaba's first large-scale investment in an independent manner operational resources, integration of resources for the first time under the wire industry, for the first time have the line marketing activities of the industry. Guangdong Province is the country's first LED industry as a strategic emerging industries, has been a punch in the first line of LED province. Alibaba jointly occupy half of the domestic LED industry in Guangdong, electricity providers to build LED industry ecosystem. Whole chain on the line, selling for one, establish industry influence industrial belt, horizontal integration ...... "Guangdong model" to lead the country, victorious in the inside and outside the industry, thus, when the joint cooperation Alibaba preferred Guangdong reason, it is obvious .
Keywords: ISA Analysis
Recently, the International Lighting Alliance (ISA) issued the "ISA global semiconductor lighting industry and market trend analysis report (2014)." Its unique features include:
1, global. The report includes the development of different regions of the global semiconductor lighting, such as strategic priorities, policies focused, technology or short board, the market space;
2, the original data. A considerable part of the report from the data and information provided directly by ISA members, especially the data emerging countries, is the first systematic elaboration;
3, for the most used areas (such as street) and the emerging field of (off-grid lighting) to be described in a special section. This is why many companies, consulting organizations eager to understand and clarify aspects;
4, is conducive to the reader to judge comparisons.
Edition of the report is the first industry report ISA, ISA will fully listen to members on the basis of feedback to determine the direction and content of the next report.
Keywords: LED full color
Future, LED full color product technology will continue to enhance and expand the market space, and play the advantages of energy saving, to achieve a more beautiful, creative new applications. Trends to be attributed to the following:
1. Large-screen technology.
2. The definition of high density. High-density, high-definition LED display small spacing will be the future trend.
3. energy conservation. Energy conservation is the direction of our country in any one industry worked for.
4. intelligent. LED full color product development to a certain stage.
5. light and thin. Conducive to product installation, maintenance, more secure, increase the aesthetics.
6. normalized by-point correction. Future-by-point correction will become the norm in full color technology.
7. Full Color civilians.
8. indoor outdoor screen technology. Future, outdoor full color paste will gradually replace the in-line products.
9. decoration, landscape and display integration.
10. enterprises run screen illumination. Currently, they sell lighting the number of firms in the display industry is basically in shape.
Keywords: Energy Plan
Recently, the State Council issued the "Energy Development Strategy Action Plan (2014-2020 years)," clearly the optimization of the energy structure, promote energy technology and innovation as a strategic task of China's energy development, noting in particular efforts to optimize the energy structure, the development of clean carbon energy as the main direction of the energy structure adjustment, vigorously develop renewable energy sources.
Plan proposed to strengthen the building energy planning, implementation of building energy efficiency upgrade project, the implementation of 75 percent of the residential building energy efficiency design standards as soon as possible, to promote energy efficient appliances and green lighting, and actively promote the construction of new energy city.
Energy Action Plan, China will implement conservation priority, based on domestic, green carbon, innovation-driven four strategies.
In short, the "plan" is designed to consume less energy to support economic and social development, the domestic supply of energy security as the main channel, the clean low carbon energy as the main direction of the energy structure adjustment, deepen reform of energy.
Keywords: share
LED lighting industry to maintain rapid growth in recent years, the Ministry predicts domestic led street lighting fixture next year will continue to maintain 20% -30% growth, increasing the share mainly in civil and road lighting and other public areas. In addition, the NDRC resource conservation and environmental protection department expects 2015 LED lighting market share of 20% of the target will be achieved ahead of schedule.
China's LED industry output rate of about 30% growth, the main device luminous efficiency is close to the international mainstream level, basically complete industrial chain. But at the same quality and safety performance of lamps is a major problem, if further cooperation with international companies and research institutions to address quality issues in different ways, in the next 3-5 years, LED lighting products in the Chinese market will be reduced to an acceptable range of people.
Keywords: penetration
Expert analysis, in 2015 the global lighting market will reach $ 82.1 billion, of which, driven by emerging markets poised, LED lighting market will reach $ 25.7 billion, the market penetration of 31.
Experts said that in order to observe the 2015 regional global LED lighting market size, market share in Europe size 23, although did not see massive subsidies, but its high price and the light of cultural differences, so that the LED commercial lighting and outdoor architectural lighting to enhance the market demand. The Chinese market segment share 21 market share, because China is a country of manufacture lighting products, coupled with a complete supply chain cost advantages, market competition relative to other markets and more intense, regardless of brand manufacturers, foundries, or emerging lighting manufacturers and packaging manufacturers, in addition to significantly enhance the penetration rate of LED lighting, the development of sales channels is the year's major development projects.
Keywords: yin and yang contract
"As long as the transaction, how do prices are OK," "trading center have friends, RBI can less tax" ...... when to buy a house, many intermediaries will throw the "internal public relations" gimmick to attract buyers.
In fact, tax avoidance "yin and yang contract" does exist, and for the formation of a real estate transaction gray industrial chain.
"Not only fake real estate license, fake contracts, fake divorce certificate can be produced, but also to manipulate the house last trading price, or even less than one year of house transaction made transactions to evade sales tax for five years." Shanghai prosecutors handling the case a said. In fact, throughout the real estate transaction tax evasion is widespread. Individuals illegal "tax" is unfair to most taxpayers objectively.
As the market enters a period of adjustment, the fine is the direction of real estate regulation, the need for a more refined policies. For Real Estate Agents "yin and yang contract" and "trapped" tax penalties should also be strengthened.
Ephesus Lighting will supply LED lighting for Ottawa Senators hockey
Ephesus Lighting has announced that it will supply its Arena family of LED luminaires for a lighting retrofit of the Canadian Tire Centre in Ottawa, Canada — the home arena for the Ottawa Senators National Hockey League (NHL) team. The lighting of a professional arena follows several recent Ephesus projects at universities of indoor and outdoor sports facilities with sold-state lighting (SSL).
Ephesus Lighting will supply led street light with solar panel for Ottawa Senators hockey
The Canadian Tire Centre project will be perhaps the highest-profile deployment yet of LED sources in lighting a major sports venue. While LEDs can deliver plenty of lumens in such applications, products capable of such output have been judged as too costly and heavy relative to legacy high-intensity discharge (HID) sources such as metal halide (MH). Perhaps the most significant prior LED-industry project was lighting of the Weber State University arena by GE Lighting last year.
LED lighting offers a number of potential advantages in arena lighting including the ability of operators to dim or extinguish lights on demand. HID lighting requires mechanical shutters to achieve dramatic effects due to the long restrike time of the sources. LED lighting can also serve both to illuminate a playing surface and provide lighting for the seating areas and even for emergency exit needs.
LEDs and viewer experience
"Sports and entertainment facility operators appreciate that LED lighting is the natural evolution of arena and stadium lighting because it provides an optimal stage for events in person and on high-definition television," explained Amy Casper, CEO of Ephesus Lighting. "The success of our lighting solutions and the glowing testimonials from fans, players, television broadcasters, and facility operators reinforce this fact and prove without a shadow of a doubt that LED is ready for the big leagues."
Indeed, the arena operator expects the new lighting to provide better lighting for the athletes and a better viewing experience for spectators. The Canadian Tire Center had tested Ephesus' products against other LED fixtures and determined that the Arena 300 and 600 fixtures would deliver optimal uniformity. The new lighting is projected to deliver 75-fc levels with one-third fewer fixtures relative to the legacy lighting and deliver 70% energy savings.
"In our side-by-side test, it was clear that the Ephesus Lighting solution made the most sense to us for a variety of reasons," said Tom Conroy, vice president and executive director of the Canadian Tire Centre. "Our facility operators will benefit from the versatility of the system and the fact that it is practically maintenance free. But most importantly, our fans at Canadian Tire Centre and watching at home will clearly see a better game. Additionally, this new lighting system will allow our game entertainment team to instantly strike and illuminate the arena, which will open the door for an enhanced presentation and better fan experience."
The led street lighting Manufacturer is also installing the Ephesus wireless control system to enable the on-demand control capabilities mentioned by Conroy. The controls will enable precise control of the different fixtures to match the requirements of the event taking place. Indeed, the arena hosts events year-round including concerts and other types of sporting events beyond ice hockey.
Ephesus has announced a number of other high profile projects recently in college venues. For example, Duke University in Durham, NC recently lit its Jack Katz Stadium using LED lighting. Ephesus said that project was the first outdoor LED installation in an NCAA Division 1 sports venue. The company also announced three indoor arena projects in colleges located in the US and Canada.
Ephesus Lighting will supply led street light with solar panel for Ottawa Senators hockey
The Canadian Tire Centre project will be perhaps the highest-profile deployment yet of LED sources in lighting a major sports venue. While LEDs can deliver plenty of lumens in such applications, products capable of such output have been judged as too costly and heavy relative to legacy high-intensity discharge (HID) sources such as metal halide (MH). Perhaps the most significant prior LED-industry project was lighting of the Weber State University arena by GE Lighting last year.
LED lighting offers a number of potential advantages in arena lighting including the ability of operators to dim or extinguish lights on demand. HID lighting requires mechanical shutters to achieve dramatic effects due to the long restrike time of the sources. LED lighting can also serve both to illuminate a playing surface and provide lighting for the seating areas and even for emergency exit needs.
LEDs and viewer experience
"Sports and entertainment facility operators appreciate that LED lighting is the natural evolution of arena and stadium lighting because it provides an optimal stage for events in person and on high-definition television," explained Amy Casper, CEO of Ephesus Lighting. "The success of our lighting solutions and the glowing testimonials from fans, players, television broadcasters, and facility operators reinforce this fact and prove without a shadow of a doubt that LED is ready for the big leagues."
Indeed, the arena operator expects the new lighting to provide better lighting for the athletes and a better viewing experience for spectators. The Canadian Tire Center had tested Ephesus' products against other LED fixtures and determined that the Arena 300 and 600 fixtures would deliver optimal uniformity. The new lighting is projected to deliver 75-fc levels with one-third fewer fixtures relative to the legacy lighting and deliver 70% energy savings.
"In our side-by-side test, it was clear that the Ephesus Lighting solution made the most sense to us for a variety of reasons," said Tom Conroy, vice president and executive director of the Canadian Tire Centre. "Our facility operators will benefit from the versatility of the system and the fact that it is practically maintenance free. But most importantly, our fans at Canadian Tire Centre and watching at home will clearly see a better game. Additionally, this new lighting system will allow our game entertainment team to instantly strike and illuminate the arena, which will open the door for an enhanced presentation and better fan experience."
The led street lighting Manufacturer is also installing the Ephesus wireless control system to enable the on-demand control capabilities mentioned by Conroy. The controls will enable precise control of the different fixtures to match the requirements of the event taking place. Indeed, the arena hosts events year-round including concerts and other types of sporting events beyond ice hockey.
Ephesus has announced a number of other high profile projects recently in college venues. For example, Duke University in Durham, NC recently lit its Jack Katz Stadium using LED lighting. Ephesus said that project was the first outdoor LED installation in an NCAA Division 1 sports venue. The company also announced three indoor arena projects in colleges located in the US and Canada.
Philips demonstrates SimpleSet LED driver configuration at LuxLive
On their LuxLive stand, Philips Lighting was featuring the MultiOne SimpleSet driver configuration technology that can precisely set the current output of a Philips Xitanium LED driver (shown). The technology uses wireless near-field communications (NFC) to communicate with the LED driver. At present, SimpleSet is intended for customization of drivers for specific led high bay light manufacturers in a manufacturing environment, but Philips plans to enable usage in the field to set the brightness of a luminaire or gather operational data using a mobile phone.
On their LuxLive stand, Philips Lighting was featuring the MultiOne SimpleSet driver configuration technology that can precisely set the current output of a Philips Xitanium LED driver (shown).
Today, LED drivers often support a range of output current, with the current dictating the brightness of a luminaire. LED driver manufacturers offer a range of techniques for precisely setting current output, with the simplest being the installation of a resistor to program the setting. But such techniques are manually intensive.
The MultiOne SimpleSet tool automates the configuration process. Lighting manufacturers can set the driver for the particular luminaire model at hand at the end of the production line, even once assembly is complete.
"You don’t need to choose between 500 mA and 700 mA," said Reinhard Voorspoels. "You can set it to 640 mA if that is the current you need."
The SimpleSet technology has already rolled out in the US. Philips will begin shipping the tool in the UK at the beginning of 2015. And it will come to all Xitanium LED driver products.
While the SimpleSet feature might be significant to lighting designers/specifiers in the short term because they know such LED drivers will deliver precise current output, the long-term potential of the technology is perhaps more significant. Most mobile phones today include NFC capabilities. NFC uses a radio-frequency-identification (RFID)-like technology for simple wireless communications. You simply place the mobile phone near the driver and simple data transfer is securely enabled.
We've seen a few other instances of NFC used with led high bay light for sale products. For example, NXP is using NFC to pair controls and fixtures securely that are based on the EnOcean Alliance energy-harvesting technology. Other companies are using Bluetooth to link mobile phones and luminaires, but the NFC technology is much cheaper to implement. One usage of Bluetooth is to commission LED-based fixtures and NFC could be used similarly.
For example, lighting specifiers could use NFC for precise current adjustments in the field to exactly match lumen output of multiple luminaires in a setting. Moreover, lighting manufacturers might use the technology to gather operational data from the field to confirm that products are operating as expected and that projected lifetimes will be met.
On their LuxLive stand, Philips Lighting was featuring the MultiOne SimpleSet driver configuration technology that can precisely set the current output of a Philips Xitanium LED driver (shown).
Today, LED drivers often support a range of output current, with the current dictating the brightness of a luminaire. LED driver manufacturers offer a range of techniques for precisely setting current output, with the simplest being the installation of a resistor to program the setting. But such techniques are manually intensive.
The MultiOne SimpleSet tool automates the configuration process. Lighting manufacturers can set the driver for the particular luminaire model at hand at the end of the production line, even once assembly is complete.
"You don’t need to choose between 500 mA and 700 mA," said Reinhard Voorspoels. "You can set it to 640 mA if that is the current you need."
The SimpleSet technology has already rolled out in the US. Philips will begin shipping the tool in the UK at the beginning of 2015. And it will come to all Xitanium LED driver products.
While the SimpleSet feature might be significant to lighting designers/specifiers in the short term because they know such LED drivers will deliver precise current output, the long-term potential of the technology is perhaps more significant. Most mobile phones today include NFC capabilities. NFC uses a radio-frequency-identification (RFID)-like technology for simple wireless communications. You simply place the mobile phone near the driver and simple data transfer is securely enabled.
We've seen a few other instances of NFC used with led high bay light for sale products. For example, NXP is using NFC to pair controls and fixtures securely that are based on the EnOcean Alliance energy-harvesting technology. Other companies are using Bluetooth to link mobile phones and luminaires, but the NFC technology is much cheaper to implement. One usage of Bluetooth is to commission LED-based fixtures and NFC could be used similarly.
For example, lighting specifiers could use NFC for precise current adjustments in the field to exactly match lumen output of multiple luminaires in a setting. Moreover, lighting manufacturers might use the technology to gather operational data from the field to confirm that products are operating as expected and that projected lifetimes will be met.
2014年11月25日星期二
LED lighting emphasizes natural beauty in Museo del Duomo
Zumtobel Arcos Xpert LED spotlights have been deployed during the just completed two-year renovation of the Museo del Duomo - the Museum of the Cathedral located at the Milan Cathedral in Italy The UV- and IR-free lighting with a CRI of 94 highlights. the historic sculptures, paintings, and scale models of the cathedral with the oldest model dating to 1519.
The museum is located in the Palazzo Reale and now has been expanded to occupy 2200 m2 of space divided into 27 rooms and 13 themed areas. The renovation was intended to better present the historical works with glare-free light and in particular to prepare for the expected influx of visitors that will attend Expo 2015 that will run May through October next year.
Zumtobel supplied a variety of lighting products for the renovation including Panos Infinity downlights, Tecton row lighting, and Linaria fixtures in side rooms. But the led street light fixture Manufacturer are the primary luminaires that light the exhibits from above.
Related article: Osram LEDs to light the Sistine Chapel's Michelangelo frescoes
The Arcos products feature the ability to adjust color temperature on the fixture. Moreover, the products include optic accessories that can be added to control the beam. The lighting design was optimized to enhance the 3D appearance of works such as sculptures with care taken to avoid hard shadows.
The models of the cathedral are among the most cherished works housed at the museum. The oldest is a walk-in model made of wood built at a scale of 1:20 (shown). Others are made of plaster, bronze, and wood. The lighting on the models was intended to mix light and shadows in a manner that mimics natural daylight.
Related article: Toshiba progresses in Louvre project, lights Mona Lisa with LEDs
It's increasingly clear that LED lighting will become the best choice for museum projects. We recently covered a Philips Lighting led high bay light for sale at the Rijksmuseum in Amsterdam, the Netherlands.
Early on, museum exhibits directors had interest in LED lighting based on the potential energy savings given that museum lighting systems burn for long hours, and the minimal maintenance requirements. Moreover, the IR- and UV-free properties of LEDs can minimize the damage to works of art attributable to lighting. Now, however, LED lighting has matured to the point that the broad choice of color temperature, higher CRI, and uniform spectral distribution can also improve upon legacy lighting in terms of optimizing the visitor experience.
The museum is located in the Palazzo Reale and now has been expanded to occupy 2200 m2 of space divided into 27 rooms and 13 themed areas. The renovation was intended to better present the historical works with glare-free light and in particular to prepare for the expected influx of visitors that will attend Expo 2015 that will run May through October next year.
Zumtobel supplied a variety of lighting products for the renovation including Panos Infinity downlights, Tecton row lighting, and Linaria fixtures in side rooms. But the led street light fixture Manufacturer are the primary luminaires that light the exhibits from above.
Related article: Osram LEDs to light the Sistine Chapel's Michelangelo frescoes
The Arcos products feature the ability to adjust color temperature on the fixture. Moreover, the products include optic accessories that can be added to control the beam. The lighting design was optimized to enhance the 3D appearance of works such as sculptures with care taken to avoid hard shadows.
The models of the cathedral are among the most cherished works housed at the museum. The oldest is a walk-in model made of wood built at a scale of 1:20 (shown). Others are made of plaster, bronze, and wood. The lighting on the models was intended to mix light and shadows in a manner that mimics natural daylight.
Related article: Toshiba progresses in Louvre project, lights Mona Lisa with LEDs
It's increasingly clear that LED lighting will become the best choice for museum projects. We recently covered a Philips Lighting led high bay light for sale at the Rijksmuseum in Amsterdam, the Netherlands.
Early on, museum exhibits directors had interest in LED lighting based on the potential energy savings given that museum lighting systems burn for long hours, and the minimal maintenance requirements. Moreover, the IR- and UV-free properties of LEDs can minimize the damage to works of art attributable to lighting. Now, however, LED lighting has matured to the point that the broad choice of color temperature, higher CRI, and uniform spectral distribution can also improve upon legacy lighting in terms of optimizing the visitor experience.
LumaStream adds more granular solid-state lighting control in Trinity LED driver series
The Trinity product family includes drivers based on both DMX control and on what LumaStream calls analog control. The Trinity Analog models all work with 0-10V controls while delivering a constant-current supply over distances as long as 200 ft using the low-cost, two-conductor wiring typically installed to connect audio speakers.
DC power led street lights price offers a number of advantages over the more traditional AC distribution as we covered in a recent feature article. For example, centralizing the power-conversion stage can deliver better energy efficiency, and low-voltage wiring costs less to buy and install. There are a number of standard and proprietary DC-grid platforms on the market including EMerge Alliance technology and even Power over Ethernet (PoE) adapted from the IT sector. Philips Lighting, for instance, is behind a major PoE installation in an Amsterdam, Netherlands office building.
The LumaStream Analog product family is intended for applications in which 0-10V wall switches and dimmers are commonplace. The company said examples include hotels and medical facilities.
To date, the Trinity Analog products have featured as many as 12 channels to drive 24 fixtures, but supported only four control zones. The lighting designer / specifier would have to group the channels into one of the four zones. But in applications such as hotel rooms, a single switch or dimmer is often used to control only one or two fixtures. The Trinity 3-in-1 driver enables control on a channel-by-channel or two-luminaire basis.
"With the launch of the new Trinity Analog, LumaStream brings to market a powerful remote LED driver that provides all the design flexibility of our digital control, DMX platform at the lower price point of a simplified analog solution," said Eric Higgs, LumaStream CEO .
The new Trinity product delivers 700 mA per channel at 12V. In aggregate the drivers deliver 240W, and LumaStream refers to the products as remote drivers since they are located separately from the LED luminaires.
LumaStream said the new 3-in-1 product family will initially be deployed in a new facility on the St. led street light Manufacturer in the midtown area of St Petersburg, Florida. Administrative offices will each have toggle and slide lighting controls while a single Trinity driver will power the SSL products in multiple offices. The company said the analog scheme will reduce the cost of installing, commissioning, and operating the lighting system.
LumaStream targets new construction and major retrofits with the Trinity Analog technology. Obviously the platform would not be a match for a retrofit project in which the existing AC wiring is to remain in place.
DC power led street lights price offers a number of advantages over the more traditional AC distribution as we covered in a recent feature article. For example, centralizing the power-conversion stage can deliver better energy efficiency, and low-voltage wiring costs less to buy and install. There are a number of standard and proprietary DC-grid platforms on the market including EMerge Alliance technology and even Power over Ethernet (PoE) adapted from the IT sector. Philips Lighting, for instance, is behind a major PoE installation in an Amsterdam, Netherlands office building.
The LumaStream Analog product family is intended for applications in which 0-10V wall switches and dimmers are commonplace. The company said examples include hotels and medical facilities.
To date, the Trinity Analog products have featured as many as 12 channels to drive 24 fixtures, but supported only four control zones. The lighting designer / specifier would have to group the channels into one of the four zones. But in applications such as hotel rooms, a single switch or dimmer is often used to control only one or two fixtures. The Trinity 3-in-1 driver enables control on a channel-by-channel or two-luminaire basis.
"With the launch of the new Trinity Analog, LumaStream brings to market a powerful remote LED driver that provides all the design flexibility of our digital control, DMX platform at the lower price point of a simplified analog solution," said Eric Higgs, LumaStream CEO .
The new Trinity product delivers 700 mA per channel at 12V. In aggregate the drivers deliver 240W, and LumaStream refers to the products as remote drivers since they are located separately from the LED luminaires.
LumaStream said the new 3-in-1 product family will initially be deployed in a new facility on the St. led street light Manufacturer in the midtown area of St Petersburg, Florida. Administrative offices will each have toggle and slide lighting controls while a single Trinity driver will power the SSL products in multiple offices. The company said the analog scheme will reduce the cost of installing, commissioning, and operating the lighting system.
LumaStream targets new construction and major retrofits with the Trinity Analog technology. Obviously the platform would not be a match for a retrofit project in which the existing AC wiring is to remain in place.
Princeton University pursues LED-centric campus-wide lighting upgrade
Princeton University has announced the start of a project that will see more than 100,000 fixtures across the New Jersey campus upgraded to led street light fixture Manufacturer by the end of December 2016. A member of the elite Ivy League of schools that date to colonial American times, Princeton believes that adopting LEDs can contribute 16% to the Princeton Sustainability Plan goal of reducing the campus carbon footprint to 1990 levels prior to 2020.
Princeton University pursues LED-centric campus-wide lighting upgrade
Photo by Chris Lillja, Princeton Facilities Organization
"The Lighting Efficiency Upgrade Program can transform Princeton's lighting systems to one of the most modern, reliable, efficient, and environmentally responsible of their kind," said campus energy manager Bill Broadhurst. "The recent progress made in LED technologies also has allowed these projects to be good investments financially. "
The university had tested LED lighting in a number of locations over the past few years including parking areas, a gymnasium, and select academic buildings. The project that kicked off in July will cover the entire campus. Already the project has resulted in retrofits in Icahn Laboratory, Fine Hall, parts of the Engineering Quadrangle and 701 Carnegie Center.
A number of universities around the globe are finding that LED technology can both improve campus lighting and reduce costs in terms of energy usage and maintenance. The University of North Carolina has begun to renovate 13 campuses within its system. Dartmouth University reports that a retrofit in its Baker Berry Library delivered 66% energy savings. Moreover, MIT's iconic Great Dome is now lit with LEDs.
In the Princeton case, many of the early upgrades will come in the form of LED replacement lamps as the nearby photo illustrates. But ultimately the project will involve luminaires as well. Indeed, one project completed during trials was a complete retrofit of fluorescent fixtures in the university's Dillon Gymnasium with LED luminaires.
The university is shooting for a baseline 50% reduction in energy use with much of the legacy lighting comprising fluorescent products installed in a prior campus-wide retrofit two decades back. Moreover, the upgrade with longer-life LEDs will allow the university to eliminate the need to properly dispose of 60,000 lamps each year that contain mercury, and five tons of other waste including ballasts.
"In addition to the significant cost savings, revenues, and credits associated with using LED technology, the lighting upgrades also will lower the university's maintenance costs due to led street light wholesale," Broadhurst said. "The safety of the Princeton Facilities staff also will be enhanced by reducing the amount of time workers spend climbing ladders to replace thousands of burnt-out lamps each year. "
Princeton University pursues LED-centric campus-wide lighting upgrade
Photo by Chris Lillja, Princeton Facilities Organization
"The Lighting Efficiency Upgrade Program can transform Princeton's lighting systems to one of the most modern, reliable, efficient, and environmentally responsible of their kind," said campus energy manager Bill Broadhurst. "The recent progress made in LED technologies also has allowed these projects to be good investments financially. "
The university had tested LED lighting in a number of locations over the past few years including parking areas, a gymnasium, and select academic buildings. The project that kicked off in July will cover the entire campus. Already the project has resulted in retrofits in Icahn Laboratory, Fine Hall, parts of the Engineering Quadrangle and 701 Carnegie Center.
A number of universities around the globe are finding that LED technology can both improve campus lighting and reduce costs in terms of energy usage and maintenance. The University of North Carolina has begun to renovate 13 campuses within its system. Dartmouth University reports that a retrofit in its Baker Berry Library delivered 66% energy savings. Moreover, MIT's iconic Great Dome is now lit with LEDs.
In the Princeton case, many of the early upgrades will come in the form of LED replacement lamps as the nearby photo illustrates. But ultimately the project will involve luminaires as well. Indeed, one project completed during trials was a complete retrofit of fluorescent fixtures in the university's Dillon Gymnasium with LED luminaires.
The university is shooting for a baseline 50% reduction in energy use with much of the legacy lighting comprising fluorescent products installed in a prior campus-wide retrofit two decades back. Moreover, the upgrade with longer-life LEDs will allow the university to eliminate the need to properly dispose of 60,000 lamps each year that contain mercury, and five tons of other waste including ballasts.
"In addition to the significant cost savings, revenues, and credits associated with using LED technology, the lighting upgrades also will lower the university's maintenance costs due to led street light wholesale," Broadhurst said. "The safety of the Princeton Facilities staff also will be enhanced by reducing the amount of time workers spend climbing ladders to replace thousands of burnt-out lamps each year. "
MSP airport to combine LED lighting and solar generation on garages
The Metropolitan Airports Commission operates seven airports in the Minnesota Twin Cities area of Minneapolis-St. Paul, and has begun a massive energy-efficiency project including LED lighting at the flagship Minneapolis St. Paul International Airport (MSP). Construction was begun this past week on what the agency said is led street lighting Manufacturer project -. a 3-MW (megawatt) plant located atop two parking structures Moreover, the project will include retrofit of more than 7700 metal-halide fixtures to solid-state lighting (SSL) products.
Rendering of the solar array atop MSP Terminal 1's parking ramp.
Rendering of the solar array atop Terminal 1's parking ramp.
"The Metropolitan Airports Commission has worked for decades to operate Minneapolis-St. Paul International Airport as sustainably as possible, investing millions in infrastructure to reduce impacts to soil, water, and air quality, and spending nearly a half-billion dollars on noise mitigation around MSP, "said Jeff Hamiel, the Commission's executive director and CEO." This ambitious new solar energy project will create jobs, reduce the airport's carbon footprint and save the Airports Commission hundreds of thousands of dollars a year. I want to thank all the public and private entities who have worked with us to make this project possible. "
We've recently seen an uptick in projects that combine LED and solar technology. Indeed, we covered a presentation at the February Strategies in Light conference that made the point that energy-efficient LED lighting was making solar generation more viable despite the inherently low efficiency in solar panels.
The project goes beyond lighting to address many angles in energy efficiency. For example, the airport will add 18 charging stations for electric vehicles. Moreover, the expects airport the solar plant to deliver 20% of the airport's energy needs.
Minnesota Governor Mark Dayton pegged the cost of the project at $ 25.4 million and said the project is evidence of the state's proactive energy efforts in the Minnesota Clean Energy Economy Profile. The profile both documents the state's energy-efficiency efforts to data and identifies opportunities for additional clean energy projects.
"This project will create 250 new jobs, and make our airport one of the most energy-efficient in the world," said Governor Dayton, who enacted a new solar energy standard requiring utilities to produce 1.5% of their electricity from solar power by 2020 . "Minnesota's nation-leading clean energy policies, and projects like this one, have significantly reduced carbon emissions in our state while helping create thousands of new jobs. Today's announcement offers more proof that clean energy progress and job creation are complementary objectives."
The energy services company (ESCO) Ameresco has been selected to lead the project. Moreover, a number of Minnesota-based organizations will participate including tenKsolar, Thrivent Financial, and Hunt Electric. Apparently Cooper Lighting will supply the SSL fixtures as they were the only lighting company listed as a participant in the project. Utility Xcel Energy is contributing a $ 2 million grant to the project from their Renewable Development Fund.
. "Today, we celebrate a proving ground for renewable innovation in the state of Minnesota - the largest solar site in the state to date," said George Sakellaris, president and CEO of led street lighting fixture is honored to be a sustainability partner in this innovative project. We applaud the Minneapolis-St. Paul International Airport and its management for its stewardship both in pursuing renewable energy solutions for the airport as well as obtaining public-private financing to support the construction. Ameresco takes pride in contributing to local job creation as part of achieving energy savings and sustainability. "
Rendering of the solar array atop MSP Terminal 1's parking ramp.
Rendering of the solar array atop Terminal 1's parking ramp.
"The Metropolitan Airports Commission has worked for decades to operate Minneapolis-St. Paul International Airport as sustainably as possible, investing millions in infrastructure to reduce impacts to soil, water, and air quality, and spending nearly a half-billion dollars on noise mitigation around MSP, "said Jeff Hamiel, the Commission's executive director and CEO." This ambitious new solar energy project will create jobs, reduce the airport's carbon footprint and save the Airports Commission hundreds of thousands of dollars a year. I want to thank all the public and private entities who have worked with us to make this project possible. "
We've recently seen an uptick in projects that combine LED and solar technology. Indeed, we covered a presentation at the February Strategies in Light conference that made the point that energy-efficient LED lighting was making solar generation more viable despite the inherently low efficiency in solar panels.
The project goes beyond lighting to address many angles in energy efficiency. For example, the airport will add 18 charging stations for electric vehicles. Moreover, the expects airport the solar plant to deliver 20% of the airport's energy needs.
Minnesota Governor Mark Dayton pegged the cost of the project at $ 25.4 million and said the project is evidence of the state's proactive energy efforts in the Minnesota Clean Energy Economy Profile. The profile both documents the state's energy-efficiency efforts to data and identifies opportunities for additional clean energy projects.
"This project will create 250 new jobs, and make our airport one of the most energy-efficient in the world," said Governor Dayton, who enacted a new solar energy standard requiring utilities to produce 1.5% of their electricity from solar power by 2020 . "Minnesota's nation-leading clean energy policies, and projects like this one, have significantly reduced carbon emissions in our state while helping create thousands of new jobs. Today's announcement offers more proof that clean energy progress and job creation are complementary objectives."
The energy services company (ESCO) Ameresco has been selected to lead the project. Moreover, a number of Minnesota-based organizations will participate including tenKsolar, Thrivent Financial, and Hunt Electric. Apparently Cooper Lighting will supply the SSL fixtures as they were the only lighting company listed as a participant in the project. Utility Xcel Energy is contributing a $ 2 million grant to the project from their Renewable Development Fund.
. "Today, we celebrate a proving ground for renewable innovation in the state of Minnesota - the largest solar site in the state to date," said George Sakellaris, president and CEO of led street lighting fixture is honored to be a sustainability partner in this innovative project. We applaud the Minneapolis-St. Paul International Airport and its management for its stewardship both in pursuing renewable energy solutions for the airport as well as obtaining public-private financing to support the construction. Ameresco takes pride in contributing to local job creation as part of achieving energy savings and sustainability. "
Osram completes the SSL retrofit of the Vatican's Sistine Chapel
Osram has announced the completion of a major solid-state lighting (SSL) project, retrofitting the Sistine Chapel in Rome, Italy with LED-based fixtures. The new lighting uses 90% less energy than the prior installation and the project was backed by the European Union under the Digital Agenda for Europe initiative.
Osram completes the led high bay light fixture wholesale of the Vatican's Sistine Chapel
We first covered the Sistine Chapel story back about one year ago. At that time, the story was primarily focused on lighting Michelangelo's works of art. And indeed the project delivered on those goals while also providing improved ambience in the chapel. Moreover, the project far exceeded the original goal of 60% energy savings.
LED-based lighting is proving especially viable in such settings. For example, Philips lit all of the precious works in the Rijksmuseum in Amsterdam, Netherlands with LED-based fixtures. We also recently covered an application where LEDs were used in an iconic religious facility , lighting the St. Mary and Bartholomew Church in Harsefeld, Germany.
The Sistine Chapel project consumed more than 7000 LEDs from Osram Opto Semiconductors installed in custom fixtures designed for the high-profile project. Light levels are higher but controlled and visitors will enjoy the experience with enhanced viewing of the famed frescoes.
Osram believes that the work breaks new ground. "Osram has developed an LED lighting solution that sets standards in terms of technological strength, quality, and innovation," said Klaus Patzak, Osram's CFO and the executive in charge of luminaires at the company. "It's the first such solution in the world and paves the way for completely new possibilities for our clients. We will now rapidly turn this potential into reality. "
But the curators of the property are perhaps even more enamored with the results. "The Sistine Chapel contains the most extraordinary works ever conceived by the human mind and is Michelangelo's masterpiece," said Antonio Paolucci, director of the Vatican Museums. "We want to honor the 450th anniversary of Michelangelo's death by providing new lighting for his work. "
The led high bay light for sale for Information and Communication Technology within the Framework Program on Competitiveness and Innovation (PSP-CIP) subsidized the Sistine project under the banner LED4Art. And the European Union is clearly happy with the results.
"Art exists to inspire us and illuminate our minds," said Neelie Kroes, vice president of the European Commission and responsible for the Digital Agenda for Europe. "Now that we have illuminated the Sistine Chapel with LED, Michelangelo's art can fulfill this role even more than it has up until now throughout history. "
Osram completes the led high bay light fixture wholesale of the Vatican's Sistine Chapel
We first covered the Sistine Chapel story back about one year ago. At that time, the story was primarily focused on lighting Michelangelo's works of art. And indeed the project delivered on those goals while also providing improved ambience in the chapel. Moreover, the project far exceeded the original goal of 60% energy savings.
LED-based lighting is proving especially viable in such settings. For example, Philips lit all of the precious works in the Rijksmuseum in Amsterdam, Netherlands with LED-based fixtures. We also recently covered an application where LEDs were used in an iconic religious facility , lighting the St. Mary and Bartholomew Church in Harsefeld, Germany.
The Sistine Chapel project consumed more than 7000 LEDs from Osram Opto Semiconductors installed in custom fixtures designed for the high-profile project. Light levels are higher but controlled and visitors will enjoy the experience with enhanced viewing of the famed frescoes.
Osram believes that the work breaks new ground. "Osram has developed an LED lighting solution that sets standards in terms of technological strength, quality, and innovation," said Klaus Patzak, Osram's CFO and the executive in charge of luminaires at the company. "It's the first such solution in the world and paves the way for completely new possibilities for our clients. We will now rapidly turn this potential into reality. "
But the curators of the property are perhaps even more enamored with the results. "The Sistine Chapel contains the most extraordinary works ever conceived by the human mind and is Michelangelo's masterpiece," said Antonio Paolucci, director of the Vatican Museums. "We want to honor the 450th anniversary of Michelangelo's death by providing new lighting for his work. "
The led high bay light for sale for Information and Communication Technology within the Framework Program on Competitiveness and Innovation (PSP-CIP) subsidized the Sistine project under the banner LED4Art. And the European Union is clearly happy with the results.
"Art exists to inspire us and illuminate our minds," said Neelie Kroes, vice president of the European Commission and responsible for the Digital Agenda for Europe. "Now that we have illuminated the Sistine Chapel with LED, Michelangelo's art can fulfill this role even more than it has up until now throughout history. "
2014年11月24日星期一
Cree announces next-generation LED retrofit lamps with legacy looks
Cree has revealed its second-generation commercial LED bulb / lamp design with products designed to replace 40W and 60W incandescent bulbs. The new design is lower in cost with 40W-equivalent products selling for $ 7.97 at Home Depot, and the cost reductions are derived from an air-flow-based thermal design that enables the use of fewer LEDs driven at higher current and lower-cost thermal elements. The result is a replacement LED A-lamp that is mostly indistinguishable from an incandescent bulb.
Cree announce next-generation LED retrofit lamps with legacy looks
Cree has consistently been among the technology and market leaders since it entered the market with 40W- and 60W-equivalent led street lighting Manufacturer back in March 2013. The company followed those products with both 75W- and 100W-equivalent A-lamps, A-lamps with high CRI, and BR30 lamps. All shared a similar internal design based on what Cree called a filament tower.
The new design is a complete departure. Cree has said the new design looks more conventional, but the real reason for the design is lower cost and perhaps even better optical performance, although the prior lamps have remained among the most highly rated on the market.
"Since the launch of the original Cree LED bulb, consumers are rapidly switching to LED technology," said Betty Noonan, Cree chief marketing officer. "Our new Cree LED bulb goes a step further, delivering even better light performance at a lower price. This new bulb provides consumers a better overall lighting experience, which we know drives even more rapid LED adoption. "
The original design had a notable metal heat sink painted white. That feature certainly provided a different look from incandescent bulbs, but it was not nearly so obtrusive as the silver metal heat sinks with fins used on many low-cost LED bulbs.
Already the mainstream media has reported that the new Cree design has no heat sink. We have not had the chance to get a hands-on look at the product just yet (stay tuned), but we suspect that the new design has thermal elements and likely uses thermoplastics to minimize the look of the elements and minimize weight as well. Indeed, based on the specs, the new Cree lamps comes close to the weight of an incandescent bulb at around 2 oz.
Based on the cutaway photo that Cree supplied, the new design uses far fewer LEDs than did the filament tower. The LED lamp appears to be segmented into four sections, with the sectors being pie-like if vewed from the top of the bulb. Note that Philips and Best Buy have previously used segmented approaches, although ones quite different from Cree. But Philips has notably retreated from that approach in its mainstream lamps.
You can see two LEDs in the nearby photo and that would equate to eight total in the lamp. The orginal design used 20 LEDs. The reduction is clearly enabled by improvements in LED technology. But it's likely that Cree is able to drive the LEDs harder with the new thermal design while maintaining suitable life. The lamps are rated for 25,000 hours of use and carry a three-year warranty.
Cree refers to the new design as 4Flow Filament Design. The LEDs are still mounted on a central led street light wholesale or tower as in the original design. But rather than depending on a metal tower to conduct heat to the base, the new design has slits at the base and top of the bulb to allow air-flow across the LEDs and thermal surfaces to which they are mounted.
The new lamps offer 460- and 815-lm output in the 40W and 60W equivalents, respectively. As in the past Cree will offer the lamps in a warm 2700K CCT and in a daylight version at 5000K. The brighter version uses 11W. CRI is 80 or better. The product is slightly larger than an A-19 bulb, but would fit in most applications.
Cree announce next-generation LED retrofit lamps with legacy looks
Cree has consistently been among the technology and market leaders since it entered the market with 40W- and 60W-equivalent led street lighting Manufacturer back in March 2013. The company followed those products with both 75W- and 100W-equivalent A-lamps, A-lamps with high CRI, and BR30 lamps. All shared a similar internal design based on what Cree called a filament tower.
The new design is a complete departure. Cree has said the new design looks more conventional, but the real reason for the design is lower cost and perhaps even better optical performance, although the prior lamps have remained among the most highly rated on the market.
"Since the launch of the original Cree LED bulb, consumers are rapidly switching to LED technology," said Betty Noonan, Cree chief marketing officer. "Our new Cree LED bulb goes a step further, delivering even better light performance at a lower price. This new bulb provides consumers a better overall lighting experience, which we know drives even more rapid LED adoption. "
The original design had a notable metal heat sink painted white. That feature certainly provided a different look from incandescent bulbs, but it was not nearly so obtrusive as the silver metal heat sinks with fins used on many low-cost LED bulbs.
Already the mainstream media has reported that the new Cree design has no heat sink. We have not had the chance to get a hands-on look at the product just yet (stay tuned), but we suspect that the new design has thermal elements and likely uses thermoplastics to minimize the look of the elements and minimize weight as well. Indeed, based on the specs, the new Cree lamps comes close to the weight of an incandescent bulb at around 2 oz.
Based on the cutaway photo that Cree supplied, the new design uses far fewer LEDs than did the filament tower. The LED lamp appears to be segmented into four sections, with the sectors being pie-like if vewed from the top of the bulb. Note that Philips and Best Buy have previously used segmented approaches, although ones quite different from Cree. But Philips has notably retreated from that approach in its mainstream lamps.
You can see two LEDs in the nearby photo and that would equate to eight total in the lamp. The orginal design used 20 LEDs. The reduction is clearly enabled by improvements in LED technology. But it's likely that Cree is able to drive the LEDs harder with the new thermal design while maintaining suitable life. The lamps are rated for 25,000 hours of use and carry a three-year warranty.
Cree refers to the new design as 4Flow Filament Design. The LEDs are still mounted on a central led street light wholesale or tower as in the original design. But rather than depending on a metal tower to conduct heat to the base, the new design has slits at the base and top of the bulb to allow air-flow across the LEDs and thermal surfaces to which they are mounted.
The new lamps offer 460- and 815-lm output in the 40W and 60W equivalents, respectively. As in the past Cree will offer the lamps in a warm 2700K CCT and in a daylight version at 5000K. The brighter version uses 11W. CRI is 80 or better. The product is slightly larger than an A-19 bulb, but would fit in most applications.
Osram research project increases efficiency in green LEDs
Osram Opto Semiconductors has announced the results of a research program called Hi-Q-LED that has been funded by the Germany Federal Ministry of Education and Research (BMBF) The project was focused on closing the so called green gap -. The efficiency deficit common in green indium-gallium-nitride (InGaN) LEDs. The work has yielded a led high bay lighting wholesale based on a blue emitter and green phosphor that exceeds 200 lm / W in efficacy.
Osram research project increases efficiency in InGaN and phosphor-converted green LEDs
The green gap has been challenging in a number of solid-state lighting (SSL) applications. For example, RGB (red, green, blue) -based approaches to delivering white light require more green LEDs than blue or red LEDs. Moreover, monochromatic applications such as green lighting in traffic signals require driving the green LEDs at higher current levels, or using more LEDs, relative to yellow or red signal lights. The green gap has also been an obstacle in LED displays or projectors and in backlight systems.
The industry has long sought an answer to the green gap, and phosphor-converted blue LEDs have been a common approach. For example, the lime-green LED that is a key enabler of Philips color-tunable Hue products is a phosphor-converted LED . Moreover, back in 2010, Osram released results of R & D efforts in which a 3M green phosphor was applied to a blue emitter.
Native green LEDs can deliver a more narrowband emission than phosphor-converted LEDs, and therefore would be the preferred approach if the green gap can be overcome. The InGaN LED resulting from the BMBF project produces light over a narrow band at 530 nm. A 1 -mm2 chip with 350-mA drive current delivers in the range of 150 lm for a current density of 45 A / m2. Osram said the LED can deliver 338 lm at 125 A / cm2, although efficacy would drop at the higher current level. Osram explained that the advances in the native green LED came via a reduction of carrier density and improved material quality.
"InGaN-based LEDs, in which the light output is generated by an InGaN semiconductor exclusively, offer a much more narrowband emission with a spectral width of approximately 35 nm compared to green LEDs that are based on phosphor conversion," explained Andreas Löffler, project manager at Osram Opto Semiconductors. "This breakthrough is an enabling technology for highly efficient projection systems requiring a high color rendering index. After all, a high color rendering index (CRI) or an increased color gamut means a more vivid, higher-quality image . "
Still, some applications will always leverage the phosphor-converted option until native green LEDs match the higher efficacy. And for now, the efficacy above 200 lm / W remains significantly higher than the native green LEDs. Indeed, the R & D program yielded a 210- lm LED and 209-lm / W efficacy at 350 mA of drive current. The LED can deliver more than 500 lm at 160 lm / W. "Continuous improvement of the blue led high bay light price, an optimized excitation wavelength, and an increased degree of conversion of the phosphor converter are the winning combination underlying this new record-breaking LED, "said Thomas Lehnhardt, research engineer at Osram.
Of course, it will take time for Osram to bring LEDs from the lab to market. The company has not detailed the expected timeline, but in general it seems to take the LED industry two years or more to move a new architecture from the lab to the production line.
Osram research project increases efficiency in InGaN and phosphor-converted green LEDs
The green gap has been challenging in a number of solid-state lighting (SSL) applications. For example, RGB (red, green, blue) -based approaches to delivering white light require more green LEDs than blue or red LEDs. Moreover, monochromatic applications such as green lighting in traffic signals require driving the green LEDs at higher current levels, or using more LEDs, relative to yellow or red signal lights. The green gap has also been an obstacle in LED displays or projectors and in backlight systems.
The industry has long sought an answer to the green gap, and phosphor-converted blue LEDs have been a common approach. For example, the lime-green LED that is a key enabler of Philips color-tunable Hue products is a phosphor-converted LED . Moreover, back in 2010, Osram released results of R & D efforts in which a 3M green phosphor was applied to a blue emitter.
Native green LEDs can deliver a more narrowband emission than phosphor-converted LEDs, and therefore would be the preferred approach if the green gap can be overcome. The InGaN LED resulting from the BMBF project produces light over a narrow band at 530 nm. A 1 -mm2 chip with 350-mA drive current delivers in the range of 150 lm for a current density of 45 A / m2. Osram said the LED can deliver 338 lm at 125 A / cm2, although efficacy would drop at the higher current level. Osram explained that the advances in the native green LED came via a reduction of carrier density and improved material quality.
"InGaN-based LEDs, in which the light output is generated by an InGaN semiconductor exclusively, offer a much more narrowband emission with a spectral width of approximately 35 nm compared to green LEDs that are based on phosphor conversion," explained Andreas Löffler, project manager at Osram Opto Semiconductors. "This breakthrough is an enabling technology for highly efficient projection systems requiring a high color rendering index. After all, a high color rendering index (CRI) or an increased color gamut means a more vivid, higher-quality image . "
Still, some applications will always leverage the phosphor-converted option until native green LEDs match the higher efficacy. And for now, the efficacy above 200 lm / W remains significantly higher than the native green LEDs. Indeed, the R & D program yielded a 210- lm LED and 209-lm / W efficacy at 350 mA of drive current. The LED can deliver more than 500 lm at 160 lm / W. "Continuous improvement of the blue led high bay light price, an optimized excitation wavelength, and an increased degree of conversion of the phosphor converter are the winning combination underlying this new record-breaking LED, "said Thomas Lehnhardt, research engineer at Osram.
Of course, it will take time for Osram to bring LEDs from the lab to market. The company has not detailed the expected timeline, but in general it seems to take the LED industry two years or more to move a new architecture from the lab to the production line.
SIL’s Investor Forum focuses on the light in a challenging investment climate
The vitality of the LED and solid-state lighting (SSL) industry depends on constant innovations. New companies are started by entrepreneurs willing to take personal risks and backers who tackle the financial risks. In the past few years, the return on investment (ROI ) in the LED / SSL industry has been mixed. Cleantech, as a sector, has also been soured by the disastrous turn in the solar market. On top of all this, hardware is out of favor among the venture capital (VC) community. Last year, only 2% of all VC investment nationwide was in semiconductors.
In this investment climate, fundraising and finding meaningful exits are both difficult. At Strategies in Light (SIL), taking place Feb. 24-26, 2015 in Las Vegas, NV, the two keynotes at the 6th Investor Forum will address this issue from two points of view. Konrad Jarausch, who manages Passport Capital's private and public investments in buy led high bay lamps , will discuss the investment landscape in his talk, "Squeezing blood out of stone? Investing in LED / SSL Companies." He will provide some perspective on lessons learned and tips on how to approach the investment community. Dan Coyne, managing director of investment banking at Canaccord Genuity, will examine mergers and acquisitions in the ever-evolving segment. He will elaborate on the valuation environment, transaction activity (including IPOs ), and consolidation trends in LED / SSL as well as share insights from recent transactions consummated in the LED / SSL sector.
SIL's Investor Forum focuses on the light in a challenging investment climate
The 12 companies invited to present at the Investment Forum have been selected across varying technologies, nations, and sizes.
Cooledge (Canada) presented at the Investor Forum in 2012 and CEO Wade Sheen was mobbed when he left the podium. In three months, he gathered $ 9 million in funding and the company went on to win many industrial awards. With a successful and more mature company, Sheen is coming back to update forum attendees regarding the company's technology, products, and financial status.
Related article: Strategies in Light and The LED Show combine for illuminating keynotes and sessions
In the white-hot smart lighting sector, we have Ecospectral (Australia) and Orama (San Jose, CA). Ecospectral makes cloud-connected, mesh-networked sensor and control systems that measure interior events and provide intelligent response.
In the field of optics, we have LUXeXcel (the Netherlands) and Fusion Optix (Woburn, MA). LUXeXcel uses 3D printing to print its lens offerings. Prototypes and production volumes can be received in a few days. The digitization of optics manufacturing allows lighting manufacturers to customize the light distribution of every SSL design.
Related article: LUXeXceL demonstrates its patented manufacturing technology for printable optics
Representing a more mature company, led street light with solar panel has been successful in designing easy-to-use SSL systems Among the long-term innovations that will affect the SSL market, Transphorm (Goleta, CA) -. The startup funded by Google Ventures, Soros Fund Management, Kleiner Perkins Baufield Byers, and other top-name VCs -. has developed GaN-based drivers When luminaire designers want extremely small and efficient drivers, GaN-based solutions will be on the table.
Outside the SSL markets, we have invited RayVio (Hayward, CA) whose main focus is on deep-ultraviolet (UV) LED development and Outstanding Technology (Japan), which broke the world record in outdoor visible light communication (VLC) at 42.19 km .
This is just a sampling of companies presenting at the Investor Forum. Together with the full set of 12 companies, they represent some of the trending innovators in our industry.
The format of the Investor Forum is called the "Dragons' Lair" for good reason: Each company presents for 12 minutes and a panel of bankers, VCs, and corporate investors will have 8 minutes to question and comment We started this format during the. 2014 event and it received positive feedback from the audience as well as the participants. These professionals listen to company pitches every day, so their questions were pertinent and to the point.
The panelists for 2015 include Tim Woodard, Prelude Ventures; Konrad Jarausch, Passport Capital; Frank Harder, Samsung; James Kim, LG Innotek;. And Dan Coyne and Jed Dorsheimer of Canaccord Genuity They will all come together for an Investor Roundtable at the end of the day. This portion has proven to be the highlight of the day at previous conferences where lively discussions ensued and sage advice was given.
We hope you can join us at the Investor Forum during Strategies in Light on Feb. 24, 2015 at the Sands Expo and Convention Center, Las Vegas.
In this investment climate, fundraising and finding meaningful exits are both difficult. At Strategies in Light (SIL), taking place Feb. 24-26, 2015 in Las Vegas, NV, the two keynotes at the 6th Investor Forum will address this issue from two points of view. Konrad Jarausch, who manages Passport Capital's private and public investments in buy led high bay lamps , will discuss the investment landscape in his talk, "Squeezing blood out of stone? Investing in LED / SSL Companies." He will provide some perspective on lessons learned and tips on how to approach the investment community. Dan Coyne, managing director of investment banking at Canaccord Genuity, will examine mergers and acquisitions in the ever-evolving segment. He will elaborate on the valuation environment, transaction activity (including IPOs ), and consolidation trends in LED / SSL as well as share insights from recent transactions consummated in the LED / SSL sector.
SIL's Investor Forum focuses on the light in a challenging investment climate
The 12 companies invited to present at the Investment Forum have been selected across varying technologies, nations, and sizes.
Cooledge (Canada) presented at the Investor Forum in 2012 and CEO Wade Sheen was mobbed when he left the podium. In three months, he gathered $ 9 million in funding and the company went on to win many industrial awards. With a successful and more mature company, Sheen is coming back to update forum attendees regarding the company's technology, products, and financial status.
Related article: Strategies in Light and The LED Show combine for illuminating keynotes and sessions
In the white-hot smart lighting sector, we have Ecospectral (Australia) and Orama (San Jose, CA). Ecospectral makes cloud-connected, mesh-networked sensor and control systems that measure interior events and provide intelligent response.
In the field of optics, we have LUXeXcel (the Netherlands) and Fusion Optix (Woburn, MA). LUXeXcel uses 3D printing to print its lens offerings. Prototypes and production volumes can be received in a few days. The digitization of optics manufacturing allows lighting manufacturers to customize the light distribution of every SSL design.
Related article: LUXeXceL demonstrates its patented manufacturing technology for printable optics
Representing a more mature company, led street light with solar panel has been successful in designing easy-to-use SSL systems Among the long-term innovations that will affect the SSL market, Transphorm (Goleta, CA) -. The startup funded by Google Ventures, Soros Fund Management, Kleiner Perkins Baufield Byers, and other top-name VCs -. has developed GaN-based drivers When luminaire designers want extremely small and efficient drivers, GaN-based solutions will be on the table.
Outside the SSL markets, we have invited RayVio (Hayward, CA) whose main focus is on deep-ultraviolet (UV) LED development and Outstanding Technology (Japan), which broke the world record in outdoor visible light communication (VLC) at 42.19 km .
This is just a sampling of companies presenting at the Investor Forum. Together with the full set of 12 companies, they represent some of the trending innovators in our industry.
The format of the Investor Forum is called the "Dragons' Lair" for good reason: Each company presents for 12 minutes and a panel of bankers, VCs, and corporate investors will have 8 minutes to question and comment We started this format during the. 2014 event and it received positive feedback from the audience as well as the participants. These professionals listen to company pitches every day, so their questions were pertinent and to the point.
The panelists for 2015 include Tim Woodard, Prelude Ventures; Konrad Jarausch, Passport Capital; Frank Harder, Samsung; James Kim, LG Innotek;. And Dan Coyne and Jed Dorsheimer of Canaccord Genuity They will all come together for an Investor Roundtable at the end of the day. This portion has proven to be the highlight of the day at previous conferences where lively discussions ensued and sage advice was given.
We hope you can join us at the Investor Forum during Strategies in Light on Feb. 24, 2015 at the Sands Expo and Convention Center, Las Vegas.
Zumtobel refines its SSL line with tunable white products based on study
Zumtobel has added tunable-white technology to its line of office-centric LED-based luminaires, reacting to a study that the company conducted in conjunction with Fraunhofer IAO. Lighting designers / specifiers now have access to recessed and surface-mount solid-state lighting (SSL) luminaires in round and rectangular form factors that can all be configured over the range of 3000K to 6000K CCT.
Zumtobel refines its solid-state lighting line with tunable white products based on study
We first heard about the study with Fraunhofer back at the Light + Building trade fair in April At the time, Zumtobel said it would offer the Sequence and Light Fields products -. Both linear led street light wholesale designed for offices -. With tunable white point Now the company is further expanding the offering and fully commercializing the earlier demonstrated LED-based products.
The survey revealed a distinct preference among office workers for light in the 3000K to 6000K CCT range and even a stronger preference in the narrower 4000K to 5000K range. But the survey also showed that 57% of office workers have no control over their own lighting environment . Zumtobel hopes to change that.
Zumtobel refers to its variable-CCT technology as tunableWhite. The prime target of the technology platform remains the Light Fields family of rectangular / linear LED ceiling fixtures. The company now offers the products in recessed, flush-mount, pendant, and free-standing SSL models. All offer tunability in the 3000K to 6000K range.
The company has added the tunableWhite technology for the first time into the Mellow Light V SSL portfolio. The recessed troffers are targeted at both task and ambient lighting with a glare-free, uniform beam distribution.
The Ondaria family is the other product line to get the tunable technology. The circular design is available in 440-, 640-, and 940-mm versions. The elegant LED product targets high-profile office areas such as lobbies, foyers, and common areas.
Zumtobel's Ondaria family is the other solid-state lighting product line to get the tunableWhite technology.
The SSL products can be installed with a variety of control scenarios. Moreover, Zumtobel offers its own Litecom led street lights price platform.
The proliferation of tunable white point in lighting products is growing concurrently with color-tunable products as we noted in a 2013 article on LightFair exhibits.The tunable white products can potentially boost productivity and enhance worker wellbeing, although opinions differ on how well scientists understand the impact of spectral distribution and CCT on human physiology.
Zumtobel refines its solid-state lighting line with tunable white products based on study
We first heard about the study with Fraunhofer back at the Light + Building trade fair in April At the time, Zumtobel said it would offer the Sequence and Light Fields products -. Both linear led street light wholesale designed for offices -. With tunable white point Now the company is further expanding the offering and fully commercializing the earlier demonstrated LED-based products.
The survey revealed a distinct preference among office workers for light in the 3000K to 6000K CCT range and even a stronger preference in the narrower 4000K to 5000K range. But the survey also showed that 57% of office workers have no control over their own lighting environment . Zumtobel hopes to change that.
Zumtobel refers to its variable-CCT technology as tunableWhite. The prime target of the technology platform remains the Light Fields family of rectangular / linear LED ceiling fixtures. The company now offers the products in recessed, flush-mount, pendant, and free-standing SSL models. All offer tunability in the 3000K to 6000K range.
The company has added the tunableWhite technology for the first time into the Mellow Light V SSL portfolio. The recessed troffers are targeted at both task and ambient lighting with a glare-free, uniform beam distribution.
The Ondaria family is the other product line to get the tunable technology. The circular design is available in 440-, 640-, and 940-mm versions. The elegant LED product targets high-profile office areas such as lobbies, foyers, and common areas.
Zumtobel's Ondaria family is the other solid-state lighting product line to get the tunableWhite technology.
The SSL products can be installed with a variety of control scenarios. Moreover, Zumtobel offers its own Litecom led street lights price platform.
The proliferation of tunable white point in lighting products is growing concurrently with color-tunable products as we noted in a 2013 article on LightFair exhibits.The tunable white products can potentially boost productivity and enhance worker wellbeing, although opinions differ on how well scientists understand the impact of spectral distribution and CCT on human physiology.
Sainsbury's details LED-based lighting retrofits at LuxLive
In a LuxLive presentation taking place on the show floor on Nov. 19, Simon Waldron of Sainsbury's took the EcoLight Arena stage and discussed the retailer's commitment to energy efficiency and the success it has realized thus far with LED lighting retrofits. By the end of 2014 , the company will have installed 100,000 LED luminaires across its stores, equating to savings of 54.6 GWh (gigawatt hours) annually.
We've previously reported on a number of Sainsbury's LED lighting retrofit projects. For example, the company worked with GE Lighting on a solid-state lighting (SSL) retrofit at one store that used GE's Intrinsx-based Lumination-eries products with the planar lighting surface oriented vertically to deliver better lighting on shelves. Earlier the company had moved to LEDs to light refrigerated cases working with Nualight.
The retail chain, however, has around 600 supermarkets and 650 convenience stores in the UK, and a broader move to led high bay light for sale is a key cog in its environmental program called "Respect for the environment." Moreover, the company is committed to energy reductions of 65% relative to the operational energy it used in 2005, for a 30% overall savings.
Waldron, engineering manager at Sainsbury's, said, "In order to reduce the running energy cost of lighting, the move to LED was clear." But he added that the transition is a significant challenge. He said that you can not just peruse the catalog of a lighting company and that you must understand performance of luminaires and the stated values of potential suppliers.
The company established a guideline requiring payback in five years or less for LED lighting retrofit projects. Most are delivering quicker return on investment (ROI). Still, Waldron said companies should consider total cost of ownership (TCO) when planning a project. He showed a sample comparison of SSL with high-output T5 fluorescent lighting. The T5 option was cheaper at the five-year mark but over 20 years LEDs provide a significant advantage.
Wolverhampton supermarket
Waldron provided details on a couple of notable projects, including the supermarket in Wolverhampton that was the first 100% LED-lit store. The SSL retrofit includes the sales floor, back-of-house operational areas, the adjacent petrol station, the parking area under the store, and more.
The company is both carefully choosing fixtures from many sources and how those products are being deployed and controlled. On the Wolverhampton sales floor, Waldron said 2.1 km of Zumtobel Tecton linear LED fixtures were installed. Prior to 2012, the company lit the sales floor to 1000 lx. Now the standard is 800 lx and 650 lx where skylights are installed. Moreover, all of the sales floor fixtures include controls and dimming support.
In the undercroft parking area, Waldron said that the LED lighting retrofit resulted in 103 fewer luminaires being installed. In part the reduction was due to placing light where it is needed. He said the company is no longer lighting the tops of cars.
Overall, the Wolverhampton store now uses 56% less energy than before. Expected payback is 3.2 years. The project utilized 27 different SSL luminaires in total that integrated a total of 214,000 packaged LEDs ,.
In-aisle lighting
The presentation also included details on a supermarket project in Debben in which Sainsbury's has experimented with a new approach to lighting shopping aisles. The store underwent a major renovation including an expansion from 6000 ft2 to 11,000 ft2. Still, the company reduced the luminaire count on the sales floor from 253 to 207.
The established methodology for sales-floor lighting uses a cross-aisle approach in which the LED luminaires run perpendicular to the shelves. That approach delivers a lot of light on the aisle floors but less than ideal vertical illumination on the shelves and merchandise.
In the food shopping area, led street lighting Manufacturer is positioned in the middle of aisles and the linear fixtures run parallel with the shelves. Waldron said the approach is delivering more lux on shelves and more uniform lighting on the merchandise. He quipped, "We don 't sell [floor] tiles, "essentially pointing out the performance of the prior cross-aisle lighting.
Waldron said the project at the Debben store will achieve payback inside of two years. Moreover, the LED lighting retrofit is delivering 117 kWh in annual energy savings.
We've previously reported on a number of Sainsbury's LED lighting retrofit projects. For example, the company worked with GE Lighting on a solid-state lighting (SSL) retrofit at one store that used GE's Intrinsx-based Lumination-eries products with the planar lighting surface oriented vertically to deliver better lighting on shelves. Earlier the company had moved to LEDs to light refrigerated cases working with Nualight.
The retail chain, however, has around 600 supermarkets and 650 convenience stores in the UK, and a broader move to led high bay light for sale is a key cog in its environmental program called "Respect for the environment." Moreover, the company is committed to energy reductions of 65% relative to the operational energy it used in 2005, for a 30% overall savings.
Waldron, engineering manager at Sainsbury's, said, "In order to reduce the running energy cost of lighting, the move to LED was clear." But he added that the transition is a significant challenge. He said that you can not just peruse the catalog of a lighting company and that you must understand performance of luminaires and the stated values of potential suppliers.
The company established a guideline requiring payback in five years or less for LED lighting retrofit projects. Most are delivering quicker return on investment (ROI). Still, Waldron said companies should consider total cost of ownership (TCO) when planning a project. He showed a sample comparison of SSL with high-output T5 fluorescent lighting. The T5 option was cheaper at the five-year mark but over 20 years LEDs provide a significant advantage.
Wolverhampton supermarket
Waldron provided details on a couple of notable projects, including the supermarket in Wolverhampton that was the first 100% LED-lit store. The SSL retrofit includes the sales floor, back-of-house operational areas, the adjacent petrol station, the parking area under the store, and more.
The company is both carefully choosing fixtures from many sources and how those products are being deployed and controlled. On the Wolverhampton sales floor, Waldron said 2.1 km of Zumtobel Tecton linear LED fixtures were installed. Prior to 2012, the company lit the sales floor to 1000 lx. Now the standard is 800 lx and 650 lx where skylights are installed. Moreover, all of the sales floor fixtures include controls and dimming support.
In the undercroft parking area, Waldron said that the LED lighting retrofit resulted in 103 fewer luminaires being installed. In part the reduction was due to placing light where it is needed. He said the company is no longer lighting the tops of cars.
Overall, the Wolverhampton store now uses 56% less energy than before. Expected payback is 3.2 years. The project utilized 27 different SSL luminaires in total that integrated a total of 214,000 packaged LEDs ,.
In-aisle lighting
The presentation also included details on a supermarket project in Debben in which Sainsbury's has experimented with a new approach to lighting shopping aisles. The store underwent a major renovation including an expansion from 6000 ft2 to 11,000 ft2. Still, the company reduced the luminaire count on the sales floor from 253 to 207.
The established methodology for sales-floor lighting uses a cross-aisle approach in which the LED luminaires run perpendicular to the shelves. That approach delivers a lot of light on the aisle floors but less than ideal vertical illumination on the shelves and merchandise.
In the food shopping area, led street lighting Manufacturer is positioned in the middle of aisles and the linear fixtures run parallel with the shelves. Waldron said the approach is delivering more lux on shelves and more uniform lighting on the merchandise. He quipped, "We don 't sell [floor] tiles, "essentially pointing out the performance of the prior cross-aisle lighting.
Waldron said the project at the Debben store will achieve payback inside of two years. Moreover, the LED lighting retrofit is delivering 117 kWh in annual energy savings.
2014年11月23日星期日
Larson Electronics Magnalight Releases Explosion Proof LED Light for Corrosive Environments
LED explosion proof LED light fixture designed specifically for use in wet and corrosive locations. Able to withstand the damaging effects of wet and corrosive environments, the HALP- 48-2L-LED explosion proof LED light provides high light output combined easy upgrading capability. Costing less than comparable LED lights with permanently integrated led street lights price, these fixtures are ideal for cost conscious operators in the petrochemical and industrial marine industries who require durable and effective lighting solutions that can be easily serviced
The HALP- 48-2L-LED Class 1 Division 2 LED Light from Magnalight.com is an ideal lighting solution for those in the marine and petrochemical industries who need a Class 1 Division 2 lighting solution that can stand up to the corrosive effects of marine and wet environments. Featuring non-corrosive materials including a glass fiber reinforced polyester housing, poured in cover gasket, stainless steel cover latches, and impact resistant acrylic diffuser, this light is specifically designed for areas where wetness and corrosive marine conditions are problems. These fixtures are equipped with Magnalight's high output LED tube lamps, giving them excellent lumen output and contrasting capability as well as a long 50,000+ hour operating life and high resistance to damage from vibrations and impacts. Since these units are equipped with LEDs, the fixtures contain no ballasts, which helps to make these units light in weight and easier to install and service than integral LED fixtures or old style fluorescent units. Unlike many comparable fixtures which rely on integrated LEDs for their high output, HALP- 48-2L-LED provides a lower cost alternative that can be upgraded and re-lamped as easily as a traditional fixture. Fixtures with integrated LED require the operator to replace the whole unit once the fixture reaches the end of its operational life, while the HALP- 48-2L- LED on the other hand allows operators to simply open the unit and replace the lamps. This easy serviceability also means that operators can upgrade to higher output LED lamps as the technology advances, allowing them to save money while improving lighting effectiveness in the future. These explosion proof light fixtures hold added benefits over integrated fixtures as they are much lighter in weight, and with integrated fixtures costing in excess of $ 1,000 on average, are considerably more cost effective at less than $ 700.00 in price. The HALP- 48-2L-LED carries UL Class 1 Division 2, Groups A, B, C, D and UL 1598A Marine Type approvals and is compatible variety of voltages including 120V-60hz 220V-50hz 240V-60hz and 277V-60hz. Magnalight maintains a full inventory of explosion proof lighting solutions, which allows them to provide immediate delivery of these lights, oftentimes with same day shipping if an order is received before 4:00 pm CT.led street light Manufacturer is a cost effective lighting solution for operators in hazardous locations with corrosive environments that provides long life and reduced operating costs as well as easy upgrade capability.
"The HALP- 48-2L-LED Class 1 Division 2 LED light is ideal for hazardous location areas, including rigs." Said Rob Bresnahan with Larson Electronics' Magnalight.com. "This hazardous location LED light can be upgraded to higher output LED modules for less than $ 100 as more powerful LEDs become available. "
The HALP- 48-2L-LED Class 1 Division 2 LED Light from Magnalight.com is an ideal lighting solution for those in the marine and petrochemical industries who need a Class 1 Division 2 lighting solution that can stand up to the corrosive effects of marine and wet environments. Featuring non-corrosive materials including a glass fiber reinforced polyester housing, poured in cover gasket, stainless steel cover latches, and impact resistant acrylic diffuser, this light is specifically designed for areas where wetness and corrosive marine conditions are problems. These fixtures are equipped with Magnalight's high output LED tube lamps, giving them excellent lumen output and contrasting capability as well as a long 50,000+ hour operating life and high resistance to damage from vibrations and impacts. Since these units are equipped with LEDs, the fixtures contain no ballasts, which helps to make these units light in weight and easier to install and service than integral LED fixtures or old style fluorescent units. Unlike many comparable fixtures which rely on integrated LEDs for their high output, HALP- 48-2L-LED provides a lower cost alternative that can be upgraded and re-lamped as easily as a traditional fixture. Fixtures with integrated LED require the operator to replace the whole unit once the fixture reaches the end of its operational life, while the HALP- 48-2L- LED on the other hand allows operators to simply open the unit and replace the lamps. This easy serviceability also means that operators can upgrade to higher output LED lamps as the technology advances, allowing them to save money while improving lighting effectiveness in the future. These explosion proof light fixtures hold added benefits over integrated fixtures as they are much lighter in weight, and with integrated fixtures costing in excess of $ 1,000 on average, are considerably more cost effective at less than $ 700.00 in price. The HALP- 48-2L-LED carries UL Class 1 Division 2, Groups A, B, C, D and UL 1598A Marine Type approvals and is compatible variety of voltages including 120V-60hz 220V-50hz 240V-60hz and 277V-60hz. Magnalight maintains a full inventory of explosion proof lighting solutions, which allows them to provide immediate delivery of these lights, oftentimes with same day shipping if an order is received before 4:00 pm CT.led street light Manufacturer is a cost effective lighting solution for operators in hazardous locations with corrosive environments that provides long life and reduced operating costs as well as easy upgrade capability.
"The HALP- 48-2L-LED Class 1 Division 2 LED light is ideal for hazardous location areas, including rigs." Said Rob Bresnahan with Larson Electronics' Magnalight.com. "This hazardous location LED light can be upgraded to higher output LED modules for less than $ 100 as more powerful LEDs become available. "
Taiwan will fully replace mercury street light by LED in two years
The premier of Taiwan Jiang Yihua today (14th Nov) approved the "Mercury streetlight sunset plan", it is expected to invest NT $ 5.49 billion yuan (about 178.44 million US dollars) in the next two years, aim to assist local governments on replacing 692,000 units mercury street lights by led high bay lighting wholesale in the end of 2016. After the completion of replacement, Taiwan will become the world's first region which eliminates mercury lights comprehensively. It is expected to save up to 640 million Kwh annually, will reduce NT $ 1.1 billion yuan (about 35.75 million US dollars) electricity cost and NT $ 346 million yuan (about 11.24 million US dollars) maintenance costs, the local government expenditure can save up to NT $ 7.23 billion yuan (about 235 million US dollars) in five years.
The premier spokesman Sun Liqun said that in order to accelerate the development of LED optoelectronic industry and reduce carbon emissions, Taiwan promoted LED traffic light since 2008, and make Taiwan became the second area that fully using LED traffic lights; also develop LED street light standard (CNS15233) in the same year, and began to promote the led high bay light for sale demonstration project.
The premier stated that besides the promotion of LED street light by government funds, they will add mandatory regulations to prohibit the use of mercury lights at the same time, and finally achieve the goal of fully replaced the mercury lights. Taiwan LED street lamp performances were improved significantly, the average luminous efficiency is more than 100lm / W, which is about three times of mercury lights, while the life is up to six years, also three times of the mercury lamp, so it can fully replace the traditional mercury light.
The premier spokesman Sun Liqun said that in order to accelerate the development of LED optoelectronic industry and reduce carbon emissions, Taiwan promoted LED traffic light since 2008, and make Taiwan became the second area that fully using LED traffic lights; also develop LED street light standard (CNS15233) in the same year, and began to promote the led high bay light for sale demonstration project.
The premier stated that besides the promotion of LED street light by government funds, they will add mandatory regulations to prohibit the use of mercury lights at the same time, and finally achieve the goal of fully replaced the mercury lights. Taiwan LED street lamp performances were improved significantly, the average luminous efficiency is more than 100lm / W, which is about three times of mercury lights, while the life is up to six years, also three times of the mercury lamp, so it can fully replace the traditional mercury light.
Talk about the importance of aging test LED display and precautions
LED aging test in product quality control is a very important part. After aging LED products can enhance its effectiveness, and help stabilize the effectiveness of post-use. led street light wholesale is based on the product's countermeasures failure rate curve that is characteristic of the bathtub curve taken in order to improve the reliability of the product.
Aging into white light LED display aging (4 hours), and video aging (48 hours).
LED aging methods include constant voltage constant current aging and aging.
Constant current source is electric current at all times constant. Has a frequency of problems, it is not a constant. It is AC or pulsating current. AC or pulsating current source can be designed to RMS constant, but this power can not be called a "constant current source." Aging is the most constant LED current job characteristics, LED aging is the most scientific way. An aging means the impact of aging but also manufacturers overcurrent latest adopted by the use of adjustable frequency, adjustable constant current source for such aging in a short time to judge the quality of the life expectancy of the LED, and can pick out many conventional aging can not pick out the hidden LED.
So pay attention to the led street lighting fixture aging test
1, the test content: black and white, red, green, blue monochrome, grayscale gradient, video effects, text effects
2, led display a white screen test playing time is not less than 24 hours
3, monochrome, grayscale gradient test of not less than 24 hours
4, video, text effects test of not less than 24 hours
5, led screen burn-in test must manned, identify problems and timely reported to the Engineering Manager for processing.
Aging into white light LED display aging (4 hours), and video aging (48 hours).
LED aging methods include constant voltage constant current aging and aging.
Constant current source is electric current at all times constant. Has a frequency of problems, it is not a constant. It is AC or pulsating current. AC or pulsating current source can be designed to RMS constant, but this power can not be called a "constant current source." Aging is the most constant LED current job characteristics, LED aging is the most scientific way. An aging means the impact of aging but also manufacturers overcurrent latest adopted by the use of adjustable frequency, adjustable constant current source for such aging in a short time to judge the quality of the life expectancy of the LED, and can pick out many conventional aging can not pick out the hidden LED.
So pay attention to the led street lighting fixture aging test
1, the test content: black and white, red, green, blue monochrome, grayscale gradient, video effects, text effects
2, led display a white screen test playing time is not less than 24 hours
3, monochrome, grayscale gradient test of not less than 24 hours
4, video, text effects test of not less than 24 hours
5, led screen burn-in test must manned, identify problems and timely reported to the Engineering Manager for processing.
Nine Mistakes of the LED lighting design
About a little different sound design, it is worth to listen. Some, I think it makes sense, doing the labeling; some I'm not able to agree on such talent, creativity and inspiration, I think it is needed, but there is no need to go into a dead end too extreme.
Designers often create some outdated works, they will design and art confused, holding lucky, inspiration and personal expression of ideas. Let's count the number of common design errors.
Understanding these errors
Design is not complicated, is the production of the product. Because the designer very broad, from articles, information design, to the action, composition design, construction, decoration and led high bay light price design, and so on, which makes it difficult to design a clear definition. Undoubtedly, there are many different designs on the judgment, ideas and errors, and there are some differences in terms of efficient real estate works out. These misconceptions will hinder us to create good design.
Mistakes need evidence exist? Designers look briefcase design work on it! Even the appearance of a beautiful seductive design itself is dilapidated. Some designers even give all customers the same kind of housing design style (whether it is an energy drink station or funeral home); also some designers will design some departure from the traditional and simply can not understand the interface; some even flashy design, and brand Concept sweeps clean appearance.
Once implanted in the minds of the design concept, it is difficult to get rid of. They and the role you want to create a contradiction, blow your confidence as a designer, and then destroy the entire design. Merely questioned on these ideas is not enough, you need to be completely removed.
Only a clear understanding of the design of a stumbling block on the road, you can put aside distractions, focus on the important aspects of the design work.
Misunderstanding: Design is the art of siblings
One misunderstanding is to confuse two similar occupations. Walk in any bookstore you'll find books designed art books often mixed in the middle. (Business books alone may occupy an entire floor, even though it is more closely linked with the design than art and design links.) This can explain some problems. Do you think the design is art, but in fact they are completely different disciplines.
These two professions confused excusable. Art and design are inseparable insight manifests itself in appearance, is indeed the case. Maybe everyone will agree - Art exploratory insight. Whether it is beyond the boundaries of taste Duchamp, Tarantino narrative remodeling, or public space again Christo structure, all the arts are exploring all possible.
Imagine some design products: propaganda posters yoga classes, insurance policy renewal, toy assembly instructions. Do you care what the designers adopt innovative approaches it? Of course not! Each one designs meet its functional requirements. The visual processing should be able to support its contents can not be designed with phase separation.
Do not misunderstand, good design is inseparable from the innovative design approach. I just want to note is not designed to explore the most important consideration. Is an innovative design work, unexpected, or interesting, it may not make much sense, it just needs to be effective. Design and art is not much related to each other. You must look at each individual to be independent, should not in the same way to measure both.
Art representative of the left and right on behalf of the design, although both may overlap, but in most cases, they are different disciplines.
Myth: Creativity is there
The design of a long-standing misunderstanding undoubtedly idea: imagine billions of people with the same motivation, follow the same basic pattern of consumption of the same media. Despite the consistency, people still have fantasies every individual - no, is given - innovative thinking ability. It is true.
Hard to say how long the genius idea to appear again. I predict that if there is a majority of a person's life has been lucky. Look forward to every day have a genius idea or career depends on this idea is very unwise. Despite the difficulties, you can still see the new and gratifying creative on a daily basis. Thus what can you learn? Perhaps the answer is that creativity is elusive, unimportant.
Recalling the past you will learn that only a small number of people with a big leap. But have you ever thought about - whether you or anyone else is difficult to trust given to the individual? Human recombinant artists everywhere learn to mix and match, artists and ordinary people, but also doing the same work. Evaluation, create, change - each process does not occur in a vacuum environment.
Only bring goggles, creativity will be present. In other words, your mind novel ideas you may not think so unique. That's fine. While most people are tired of the repetition and monotony, but can create a truly original work is irrelevant. We pursue this goal like a human being can not climb the peak and, in fact, is not necessary.
Instead, you should try to understand the customer's problem. Listen, observe and think about what they are facing problems. Only in-depth understanding of customers and their situation, you will be able to think of an appropriate approach. Avoid too much off topic, or you will miss the opportunity.
Perhaps the idea does not exist, because we wanted to come out of the creative predecessors have created their experience here!
Myth: distinctive is the good
Your focus is by no means to create unusual works. Although in many cases, the unique design of the achievements of outstanding design work. When selecting design strategy, the first thing to consider is whether it can solve the immediate problem. In departure from the traditional way to go, how far is another issue to be discussed. Sometimes designers will be upset, will be designed into heresy. Unreasonable design of such errors is unable to meet customer demand.
As a reason for the difference is the product of the art world works to defend. In view of the very few people will dislike new things, excellent art works often require unconventional challenge. For example, the community does not know who the genius of Van Gogh; when people make this mistake and later give up some things can not understand was particularly cautious. But the design does not break down the barriers, it is an application of the practice, designers are more concerned with the design can achieve the desired effect.
The early Web designers are keen to produce a "clean" interface. I found an interesting thing: You have to move the mouse to find relevant links to pages on each of the small blocks. Different? Yes it is. Wise? Hard to say.
Unique approach has its place. Youth-oriented magazine layout using unusual methods, bike company to highlight its singular style, which is understandable. But if the audience wants to dig aesthetic lies, then it weird convergence from you! Remember, surprising ways not always apply. If the investment banks tend to avant-garde advertising, marketing team and designers should question whether such a design sense.
Cutting-edge designers prefer to break the tradition of their predecessors, the establishment of a new way of their own. Even designers have become more "rational", this impulse will continue for a long time. Some familiar saying, "I want to break through the boundaries of design." However, a unique way to be spontaneous and health, rather than imposed on a design project.
Despite ample desire is understandable, but you have to remember, designers like tailor. Your goal should be to amplify the brand, organization, product features, or is it that you want to present the creative spirit. Pursuit of novelty will keep you away from customers. You should strive to understand the specific situation, rather than join in the search for inspiration.
Myth: the design must look for inspiration
Inspiration and the Easter Bunny have in common? The answer is that the two were unable to prove the existence. You may not agree with, because you have repeatedly been inspirational. However, perhaps in a moment that you truly feel that the body has an inspiration in the flow, you are doing every step of the flow, the creation of more coherent.
For example, I myself, I never thought struck wait, never witnessed the sky is torn, lightning never struck a spark of inspiration. I think you like me.
led street lighting Manufacturer is that it's inspired by the randomness, it allows you to place their hopes in you can not rely on outside influences. These effects help you control, non fingertips, it is not always able to be closely integrated with the design of your hand. Thumb through magazines, browsing the web can also be harvested idea, I hope you can encounter a great idea.
Further exploration, thinking customer requirements, user needs, design hinder the prospects of specific tasks and work, you will do better. Only in this way, you will not go astray, because since the beginning of the design, you already know how to do it.
Myth: talent is very important
Very relaxed and words of praise: parents tell you that you are proud of them; mentor saw hope in your work; your boss that you exceeded his expectations. Praise, acclaim and recognition of the inherent impact of spare no effort to make you climb a peak again one. No wonder you are willing to continually try to surpass themselves.
Desire to design a great work is not bad quality, but the problem is that the pursuit of excellence in the design might outdated. Bold and exciting ideas, simple ideas unsatisfactory, resulting contradictions. However, the outstanding and lasting design tend latter camp.
I love the feeling of being hit by inspiration, it is so "exciting" (however, his head was branded imprint)
You need to consider how much you are into the self-consciousness in the works. Do you want to get a good sense of self, or to solve the current problem? When you want to make a groundbreaking design, you might not match the criteria, it will make you ignore the views of many possible because these views seem too dull. This mindset will hinder your thinking; soon, you would think any idea is not working well.
When you actively solve problems, thinking spark or solution no matter from where it does not matter. Simple, plain, common and are no longer important. The key is the ability to effectively solve the problem. This is the attitude you should pursue, it will make you into a more favorable working conditions. You began to cooperate with others, request feedback, burst out of the infinite idea, because you no longer play the role of lonely genius.
Remember, the customer does not require you to have much talent. For them, the only requirement is that the design work is satisfactory enough. Make appropriate design is a difficult task. Release the pressure, the liberation of the mind, freedom to sketch the outline design, blending happy, the test design work. You need to do is solve the problem.
If you always try to be smart class designer to join the team, you get probably hinder rather than an opportunity.
Myth: Design is a way of life
Although the design of a businessman's view has changed, but the designers have sometimes occurred in the way of such a change. Some designers to adhere to a (purported or metaphors) dress code. They carefully selected clothing, in order to better interpret their own cultural training to others. They even ridicule those who do not use Apple computers. They will not accept any identity does not match orders.
Will focus on appearance is concerned, there are few professional can match the design work. Perhaps this is related to your chosen career path: almost no young people willing to spend a good time in an office cubicle. By comparison, you will find that the work would be better to stimulate people's interest with those of humor who "made elegant". I can see the logic in this how to embody. Compared with other creative activities, such as juggling, swallowing fire performances, the design is relatively safe. Therefore, it became the perfect "middle" option: creative freedom plus a stable income. Looks like a shark eat it, but in reality is not.
Many works of design schools, such as the hardcover book design, high-end design and highly secretive social projects and private works of design, are passed to us an idea: design should be interesting. After leaving school, these fledgling designers are faced with the immediate wake up from a dream: to wait for them to design reports are boring, menus, charts, forms, banners, email newsletters and some other boring design projects. These efforts tend to be completed within a few hours, will not give you time to digest one semester.
Although sometimes you will encounter some exciting stories, you have to remember that the design is a job, not a lifestyle. To solve design challenges, find solutions in use, you will delight. Can harvest these trivial happiness is certainly a good thing. However, compared with the recruitment propaganda manual, the designer's life is very ordinary.
Seven Mistakes: self-expression is important
Life is short, you certainly want to make it worthwhile. Whether it is notorious reputation far, or the desire to create meaningful work, you have to have your own goals. Although these motivations are understandable, but they will distract you. The pursuit of the realization of personal needs will lead to conflicts, it forces the designer to either complete a personal mission, or customer service. This will put the designer with clients competitive position.
Technology exacerbates design industry personality worship. Once behind the designers can now create exclusive personal image. The market is important, but have their own brand is a price to pay. Rather, you have to have a degree of recognition of the creation of a personal style, which is destined to do the same kind of work you want indefinitely, day after day, for example, you need to bake the same cake. Show personality will make your design much restricted and repetitive work, may not fit the current design project.
Designers like boosting hand, your goal is not to produce its own products, or create their own brand. You're a behind the scenes. Only when your design work is a color, you will be noticed. Your work independent existence, without explanation and without any support. That does not mean you can not work with self-expression, you just need the customer's purpose in the first place, the self-realization rear.
Myth Eight: designer than the customer intelligence
When it comes to design, the customer will make some puzzling decisions. You should not be surprised, because for the mode of operation of the image, people did not have much concept. With the upgrading of the importance of design, more and more people will join the team, was forced to make unconventional choices. The knowledge they have learned on its head, but still not enough. This lack of understanding of the design should not be a defense of your own superiority.
Decisions and recommendations of clients sometimes make designer asking this question, because the designers did not want to slow down the design speed, do not want to answer the question, do not want to remove the obstacles. Regardless of how much to pay a designer to work when they feel distressed, the majority will still complain. Vent anger wholesome, if these grievances can influence the design of more harm than good.
Designers should always realize that they play a similar role with visitors. That some people focus on one area, but most people are constantly changing jobs. You're a tourist, you enrich the knowledge can help you complete the trip, but do not mistake that he is the locals.
Has specialized in the field of knowledge, allowing you to continue to get a new job. However, no matter what industry you are into, you can not completely controlled by the industry's conventional and unconventional changes and details. The solution is to share your own knowledge, feasible design. The most favorable relationship between the customer and the designer should be direct communication between the two sides equal, able to recognize each other in the design effort and hard work.
Myth Nine: designer Audience
"I like" design is a very dangerous word, no matter from whom the mouth of the same. Professional designers, this expression is more unacceptable. You put yourself pulled out from work, even inject emotion, but also remember that you are not the audience.
You want to avoid subjective response. Your work is not for you and your customers, but for those real product users: customers, visitors, users. Of course, your customers pay for your design, but their real interest lies in how people interpret and respond to the design work. You should be concerned about is the end-user or audience, even if you do not have anything in common with them. As a designer, if you think your perception is the same, that it is very unwise.
Luckily, you have a way to clear away obstacles. First, you have the ability to empathy: you can put themselves in the user's location, try to understand their situation and needs. This could include a visit to the store and see what they are doing. Or, you can spend money to enjoy some of the services and how they are functioning. If you are able to think like a user, performance and experience, you will better understand the factors that influence and stimulate them.
Designers often create some outdated works, they will design and art confused, holding lucky, inspiration and personal expression of ideas. Let's count the number of common design errors.
Understanding these errors
Design is not complicated, is the production of the product. Because the designer very broad, from articles, information design, to the action, composition design, construction, decoration and led high bay light price design, and so on, which makes it difficult to design a clear definition. Undoubtedly, there are many different designs on the judgment, ideas and errors, and there are some differences in terms of efficient real estate works out. These misconceptions will hinder us to create good design.
Mistakes need evidence exist? Designers look briefcase design work on it! Even the appearance of a beautiful seductive design itself is dilapidated. Some designers even give all customers the same kind of housing design style (whether it is an energy drink station or funeral home); also some designers will design some departure from the traditional and simply can not understand the interface; some even flashy design, and brand Concept sweeps clean appearance.
Once implanted in the minds of the design concept, it is difficult to get rid of. They and the role you want to create a contradiction, blow your confidence as a designer, and then destroy the entire design. Merely questioned on these ideas is not enough, you need to be completely removed.
Only a clear understanding of the design of a stumbling block on the road, you can put aside distractions, focus on the important aspects of the design work.
Misunderstanding: Design is the art of siblings
One misunderstanding is to confuse two similar occupations. Walk in any bookstore you'll find books designed art books often mixed in the middle. (Business books alone may occupy an entire floor, even though it is more closely linked with the design than art and design links.) This can explain some problems. Do you think the design is art, but in fact they are completely different disciplines.
These two professions confused excusable. Art and design are inseparable insight manifests itself in appearance, is indeed the case. Maybe everyone will agree - Art exploratory insight. Whether it is beyond the boundaries of taste Duchamp, Tarantino narrative remodeling, or public space again Christo structure, all the arts are exploring all possible.
Imagine some design products: propaganda posters yoga classes, insurance policy renewal, toy assembly instructions. Do you care what the designers adopt innovative approaches it? Of course not! Each one designs meet its functional requirements. The visual processing should be able to support its contents can not be designed with phase separation.
Do not misunderstand, good design is inseparable from the innovative design approach. I just want to note is not designed to explore the most important consideration. Is an innovative design work, unexpected, or interesting, it may not make much sense, it just needs to be effective. Design and art is not much related to each other. You must look at each individual to be independent, should not in the same way to measure both.
Art representative of the left and right on behalf of the design, although both may overlap, but in most cases, they are different disciplines.
Myth: Creativity is there
The design of a long-standing misunderstanding undoubtedly idea: imagine billions of people with the same motivation, follow the same basic pattern of consumption of the same media. Despite the consistency, people still have fantasies every individual - no, is given - innovative thinking ability. It is true.
Hard to say how long the genius idea to appear again. I predict that if there is a majority of a person's life has been lucky. Look forward to every day have a genius idea or career depends on this idea is very unwise. Despite the difficulties, you can still see the new and gratifying creative on a daily basis. Thus what can you learn? Perhaps the answer is that creativity is elusive, unimportant.
Recalling the past you will learn that only a small number of people with a big leap. But have you ever thought about - whether you or anyone else is difficult to trust given to the individual? Human recombinant artists everywhere learn to mix and match, artists and ordinary people, but also doing the same work. Evaluation, create, change - each process does not occur in a vacuum environment.
Only bring goggles, creativity will be present. In other words, your mind novel ideas you may not think so unique. That's fine. While most people are tired of the repetition and monotony, but can create a truly original work is irrelevant. We pursue this goal like a human being can not climb the peak and, in fact, is not necessary.
Instead, you should try to understand the customer's problem. Listen, observe and think about what they are facing problems. Only in-depth understanding of customers and their situation, you will be able to think of an appropriate approach. Avoid too much off topic, or you will miss the opportunity.
Perhaps the idea does not exist, because we wanted to come out of the creative predecessors have created their experience here!
Myth: distinctive is the good
Your focus is by no means to create unusual works. Although in many cases, the unique design of the achievements of outstanding design work. When selecting design strategy, the first thing to consider is whether it can solve the immediate problem. In departure from the traditional way to go, how far is another issue to be discussed. Sometimes designers will be upset, will be designed into heresy. Unreasonable design of such errors is unable to meet customer demand.
As a reason for the difference is the product of the art world works to defend. In view of the very few people will dislike new things, excellent art works often require unconventional challenge. For example, the community does not know who the genius of Van Gogh; when people make this mistake and later give up some things can not understand was particularly cautious. But the design does not break down the barriers, it is an application of the practice, designers are more concerned with the design can achieve the desired effect.
The early Web designers are keen to produce a "clean" interface. I found an interesting thing: You have to move the mouse to find relevant links to pages on each of the small blocks. Different? Yes it is. Wise? Hard to say.
Unique approach has its place. Youth-oriented magazine layout using unusual methods, bike company to highlight its singular style, which is understandable. But if the audience wants to dig aesthetic lies, then it weird convergence from you! Remember, surprising ways not always apply. If the investment banks tend to avant-garde advertising, marketing team and designers should question whether such a design sense.
Cutting-edge designers prefer to break the tradition of their predecessors, the establishment of a new way of their own. Even designers have become more "rational", this impulse will continue for a long time. Some familiar saying, "I want to break through the boundaries of design." However, a unique way to be spontaneous and health, rather than imposed on a design project.
Despite ample desire is understandable, but you have to remember, designers like tailor. Your goal should be to amplify the brand, organization, product features, or is it that you want to present the creative spirit. Pursuit of novelty will keep you away from customers. You should strive to understand the specific situation, rather than join in the search for inspiration.
Myth: the design must look for inspiration
Inspiration and the Easter Bunny have in common? The answer is that the two were unable to prove the existence. You may not agree with, because you have repeatedly been inspirational. However, perhaps in a moment that you truly feel that the body has an inspiration in the flow, you are doing every step of the flow, the creation of more coherent.
For example, I myself, I never thought struck wait, never witnessed the sky is torn, lightning never struck a spark of inspiration. I think you like me.
led street lighting Manufacturer is that it's inspired by the randomness, it allows you to place their hopes in you can not rely on outside influences. These effects help you control, non fingertips, it is not always able to be closely integrated with the design of your hand. Thumb through magazines, browsing the web can also be harvested idea, I hope you can encounter a great idea.
Further exploration, thinking customer requirements, user needs, design hinder the prospects of specific tasks and work, you will do better. Only in this way, you will not go astray, because since the beginning of the design, you already know how to do it.
Myth: talent is very important
Very relaxed and words of praise: parents tell you that you are proud of them; mentor saw hope in your work; your boss that you exceeded his expectations. Praise, acclaim and recognition of the inherent impact of spare no effort to make you climb a peak again one. No wonder you are willing to continually try to surpass themselves.
Desire to design a great work is not bad quality, but the problem is that the pursuit of excellence in the design might outdated. Bold and exciting ideas, simple ideas unsatisfactory, resulting contradictions. However, the outstanding and lasting design tend latter camp.
I love the feeling of being hit by inspiration, it is so "exciting" (however, his head was branded imprint)
You need to consider how much you are into the self-consciousness in the works. Do you want to get a good sense of self, or to solve the current problem? When you want to make a groundbreaking design, you might not match the criteria, it will make you ignore the views of many possible because these views seem too dull. This mindset will hinder your thinking; soon, you would think any idea is not working well.
When you actively solve problems, thinking spark or solution no matter from where it does not matter. Simple, plain, common and are no longer important. The key is the ability to effectively solve the problem. This is the attitude you should pursue, it will make you into a more favorable working conditions. You began to cooperate with others, request feedback, burst out of the infinite idea, because you no longer play the role of lonely genius.
Remember, the customer does not require you to have much talent. For them, the only requirement is that the design work is satisfactory enough. Make appropriate design is a difficult task. Release the pressure, the liberation of the mind, freedom to sketch the outline design, blending happy, the test design work. You need to do is solve the problem.
If you always try to be smart class designer to join the team, you get probably hinder rather than an opportunity.
Myth: Design is a way of life
Although the design of a businessman's view has changed, but the designers have sometimes occurred in the way of such a change. Some designers to adhere to a (purported or metaphors) dress code. They carefully selected clothing, in order to better interpret their own cultural training to others. They even ridicule those who do not use Apple computers. They will not accept any identity does not match orders.
Will focus on appearance is concerned, there are few professional can match the design work. Perhaps this is related to your chosen career path: almost no young people willing to spend a good time in an office cubicle. By comparison, you will find that the work would be better to stimulate people's interest with those of humor who "made elegant". I can see the logic in this how to embody. Compared with other creative activities, such as juggling, swallowing fire performances, the design is relatively safe. Therefore, it became the perfect "middle" option: creative freedom plus a stable income. Looks like a shark eat it, but in reality is not.
Many works of design schools, such as the hardcover book design, high-end design and highly secretive social projects and private works of design, are passed to us an idea: design should be interesting. After leaving school, these fledgling designers are faced with the immediate wake up from a dream: to wait for them to design reports are boring, menus, charts, forms, banners, email newsletters and some other boring design projects. These efforts tend to be completed within a few hours, will not give you time to digest one semester.
Although sometimes you will encounter some exciting stories, you have to remember that the design is a job, not a lifestyle. To solve design challenges, find solutions in use, you will delight. Can harvest these trivial happiness is certainly a good thing. However, compared with the recruitment propaganda manual, the designer's life is very ordinary.
Seven Mistakes: self-expression is important
Life is short, you certainly want to make it worthwhile. Whether it is notorious reputation far, or the desire to create meaningful work, you have to have your own goals. Although these motivations are understandable, but they will distract you. The pursuit of the realization of personal needs will lead to conflicts, it forces the designer to either complete a personal mission, or customer service. This will put the designer with clients competitive position.
Technology exacerbates design industry personality worship. Once behind the designers can now create exclusive personal image. The market is important, but have their own brand is a price to pay. Rather, you have to have a degree of recognition of the creation of a personal style, which is destined to do the same kind of work you want indefinitely, day after day, for example, you need to bake the same cake. Show personality will make your design much restricted and repetitive work, may not fit the current design project.
Designers like boosting hand, your goal is not to produce its own products, or create their own brand. You're a behind the scenes. Only when your design work is a color, you will be noticed. Your work independent existence, without explanation and without any support. That does not mean you can not work with self-expression, you just need the customer's purpose in the first place, the self-realization rear.
Myth Eight: designer than the customer intelligence
When it comes to design, the customer will make some puzzling decisions. You should not be surprised, because for the mode of operation of the image, people did not have much concept. With the upgrading of the importance of design, more and more people will join the team, was forced to make unconventional choices. The knowledge they have learned on its head, but still not enough. This lack of understanding of the design should not be a defense of your own superiority.
Decisions and recommendations of clients sometimes make designer asking this question, because the designers did not want to slow down the design speed, do not want to answer the question, do not want to remove the obstacles. Regardless of how much to pay a designer to work when they feel distressed, the majority will still complain. Vent anger wholesome, if these grievances can influence the design of more harm than good.
Designers should always realize that they play a similar role with visitors. That some people focus on one area, but most people are constantly changing jobs. You're a tourist, you enrich the knowledge can help you complete the trip, but do not mistake that he is the locals.
Has specialized in the field of knowledge, allowing you to continue to get a new job. However, no matter what industry you are into, you can not completely controlled by the industry's conventional and unconventional changes and details. The solution is to share your own knowledge, feasible design. The most favorable relationship between the customer and the designer should be direct communication between the two sides equal, able to recognize each other in the design effort and hard work.
Myth Nine: designer Audience
"I like" design is a very dangerous word, no matter from whom the mouth of the same. Professional designers, this expression is more unacceptable. You put yourself pulled out from work, even inject emotion, but also remember that you are not the audience.
You want to avoid subjective response. Your work is not for you and your customers, but for those real product users: customers, visitors, users. Of course, your customers pay for your design, but their real interest lies in how people interpret and respond to the design work. You should be concerned about is the end-user or audience, even if you do not have anything in common with them. As a designer, if you think your perception is the same, that it is very unwise.
Luckily, you have a way to clear away obstacles. First, you have the ability to empathy: you can put themselves in the user's location, try to understand their situation and needs. This could include a visit to the store and see what they are doing. Or, you can spend money to enjoy some of the services and how they are functioning. If you are able to think like a user, performance and experience, you will better understand the factors that influence and stimulate them.
订阅：
博文 (Atom)