How to choose and buy the Led street Light?

Led street Light 120w is the best choice of the road lighting energy saving transformation, in the purchase of the Led street Light should be how to choose and buy? What are the key points of choose and buy?
1. The luminous efficiency
LED lighting technology becoming mature, high power LED light source has can meet the general street lamp luminous flux as needed. General high pressure sodium lamp luminous flux is 100 lm/W, commonly used high power LED is 50 to 60 lm/W, with abroad the best LED chip can reach 80 lm/W, the higher luminous efficiency, energy saving effect means the better, which is to choose one of the most important indicator of LED street lamp. Leds, however, does not have explicitly stipulated in the standard, so must be carefully confirmed when purchasing LED lights.
2. The Led street Light Light failure
Now some businessmen in order to reduce costs, with hundreds of small power LED 0.5 W. However, this kind of small power LED light failure is very serious, its light failure and 80% of life is only 1000 hours. As the need for long-term use, so the street light is absolutely not allowed the use of this kind of small power LED, selects the high power LED (generally refers to more than 30 w), the light failure will be much better.
3. The Led street Light weight problems
Led street Light due to the complexity of high technical content, composition and so on reasons, some high power lamp holder will weigh far more than ordinary high pressure sodium lamp, so the support for the corresponding material requirements are higher. However, some Led street Light 120w manufacturer has as much as possible to reduce the weight of the LED lamp holder, from the original single lamp holder about 30 kilograms, dropped more than 10 kilograms, weight loss and the trend of decline further.
4. Led street Light heat dissipation
LED for semiconductor components, the wafer is affected by temperature and reduced to 30% of the initial luminous flux, will lose the meaning of lighting, or put an end to the life, the life of the high power LED street light in theory 3-50000 hours, but the premise is have good heat resistance. It is worth mentioning that domestic has adopted the world's leading manufacturer of needle cooling technology, E - lite company which is done better.


More info you can visit:http://www.lead-lighting.com/led-street-light/led-street-light-cl2-series.htm