How to maintain the LED monitor

Talking about the LED monitor, few are not familiar with, I’m afraid you although traditional CRT devices are not completely out of the application stage, and all the while leds will still appear many because of the application of technology is not mature and cause embarrassment. However, these don’t seem to make everyone on the LED street lighting any influence of liquid crystal display (LCD) devices. LED monitor problems still continue, however, everyone trust also remain robust for leds.
However, although compared with the traditional CRT display device, the LED monitor does have some “shame click” too delicate. But what is undeniable is that we have some time for it too “spoil” coddling, or too “bold” indulgence, and often we inadvertently accelerated its “aging” in the first place. Sometimes we seem the most sincere “love”, but gave the monitor “hate” engraved on the bones. So, a lot of friends may be of despair question: how can I love you? The LCD monitor!
Humidity strength should not be ignored
In fact in our application, there are quite a few users are clear the negative impact of high temperature on the LED LCD monitor. But if the unfavorable factors to the high humidity for monitor, I’m afraid it is very, very few people pay attention to. In fact, the negative effect of humidity for the LED screen, also need to cause our attention.
When it comes to the humid climate adaptability, LED obviously than ordinary CRT monitors with LCD monitor more fantastic test-taker. For a qualified LCD monitor, it needs to control the normal work of the humidity is between 30% to 80%. Perhaps this condition, in the environment of northern China may not have any difficulty, but for southern rainy climate, is definitely a big challenge. Because, once when our indoor humidity at close to 80%. The monitor may face internal condensation phenomenon. If found the screen these small water droplets, everybody don’t careless. Because these small water droplets if into the equipment internal, light will cause a leakage of the LCD monitor, or short circuit phenomenon, if severe, may also lead to damage the monitor.
Of course, though this kind of problem is likely to bring us serious consequences. But we deal with are very simple tips. Once found internal appeared after the water droplets of liquid crystal screen. We must not be switched on, and choose some power is not very big the desk lamp of equipment on the surface of some slight fever such as baking can gradually solve the problem. Needing those who remind everybody is, however, due to a strong light source will also accelerate the aging degree of liquid crystal display. In moisture, therefore, we should also avoid by all means because of haste, but with the direct light display. Such as the strong sunlight or high power lighting, and so on, we also cannot ignore such a loss.
LCD screen free of high temperature and more afraid of high temperature
As is known to all, compared with the traditional CRT displays, LED to the LCD monitor heat obviously is much smaller than the former. But the damage to the heat for the LED monitor, is worse than the traditional monitor. Generally speaking, if the LCD monitor after hours of continuous work, as well as its internal temperature rise with the increase of work load and become. Although the heat will not immediately serious fatal influence on the LED monitor. But this situation brought about by the crystal in contrast, the negative effect of aging or burn out is almost cannot be redeemed.
Therefore, if we do not use the monitor to work within a short period of time, recommended for users is best to monitor turn off or dormant. After all, for the LED LCD device, dynamic screen saver or static image for a long time, but to show crystal are a lot of consumption. Only will power equipment thoroughly, can achieve the rest of display device, relief device using fatigue.
The CRT bad habits do not to leds
In our previous applications, often at the time of the “excited”, to point the CRT display screen. Of course, as a result of the CRT screen in the main imaging device backend picture tube. Therefore, as long as not what’s on the screen, screen almost not affected by anything of real substance.
But, for the LED LCD monitor, this is almost a fatal harm. Due to the liquid crystal display light-emitting display crystal mostly concentrated in the surface of the screen display, therefore, when the screen surface has been attacked by outside force, on the screen and a variety of sensitive imaging electronic great impact, so that the fatal damage of the screen or circuit. Even if is not to achieve the effect of such a “vicious”, may also appear cover scratches, part of the crystal is damaged, eventually make the effect of the show.
As a result, not only we can’t like ever use CRT monitor, “rough” treat LCD monitors, is in the care, so we should as far as possible not to touch the monitor screen, lest cause certain influence to the equipment of the imaging.
Cleaning on screen
Actually for cleaning liquid crystal display, we also need to be careful. Given LED street lighting the fragility of the LCD, we can neither make screens attached too much dirt, and not optional equipment to clean at the same time.
Therefore, in my opinion, it is suggested that everyone in clean screen, choose quality more, composition more explicit cleaner finish cleaning work. In general, the quality of the cleaning fluid, including electrolyte, high-purity distilled water, anti-static, such as fluid can effectively clean the dust on the screen, fingerprints and other dirty marks, etc. In addition, on the choice of cloth, also super fine fiber must be used as raw material products, high-grade general glasses can also be used to send the glasses cloth cleaning cloth.
Maybe some friends will ask, ordinary tap water to clean? The author suggest that if you have a good lotion, as far as possible need not ordinary water.

More info you can visit:http://www.lighting-ledlight.com/